Corrosion behaviour of hot-rolled A356/DPSA composites synthesised by gravity die casting in 0.5 M NaOH
Preprint
- 27 April 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
This study investigates the corrosion behaviour of hot-rolled A356 aluminium composites reinforced with Date Palm Seed Ash (DPSA), produced by gravity die casting, in 0.5 M NaOH solution using electrochemical techniques. The results showed that DPSA addition improved corrosion resistance compared to the unreinforced alloy, with optimal performance observed at 0.5–0.75 wt.% reinforcement. The 0.5 wt.% composite exhibited the highest polarisation resistance (2100 .cm2) and the largest capacitive response, while Tafel polarisation showed that 0.75 wt.% had the lowest corrosion current density (1.519 ×10-3 A/cm2), indicating optimum resistance in NaOH. SEM/EDX analysis confirmed improved surface integrity and reduced porosity for the optimised composite. The hot-rolled composites are suitable for structural applications in the process industry.Keywords
This publication has 7 references indexed in Scilit:
- Effect of hot rolling on microstructures and mechanical properties of SiCp/A356 aluminum matrix compositesJournal of Materials Research and Technology, 2024
- Corrosion Behavior of Aluminum Alloys in Different Alkaline Environments: Effect of Alloying Elements and Anodization TreatmentsCoatings, 2024
- Aluminum Alloy Reinforced with Agro-Waste, and Eggshell as Viable Material for Wind Turbine Blade to Annex Potential Wind Energy: A ReviewJournal of Composites Science, 2023
- Corrosion behavior of Aluminium in alkaline-water hyacinth plant extract functionalized solution: An electrochemical and weight loss studyChemical Data Collections, 2022
- Effect of heat treatment and ageing on microstructure for hypoeutectic Al-7Si alloy and hybrid metal matrix compositesInternational Journal of Engineering, Science and Technology, 2022
- Theory of impedance for initial corrosion of metals under a thin electrolyte layer: a coupled charge transfer-diffusion modelJournal of Chemical Sciences, 2022
- The corrosion of aluminium2020