Parametric Investigation of Die-Sinking EDM of Ti6Al4V Using the Hybrid Taguchi-RAMS-RATMI Method
Open Access
- 14 August 2024
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 14 (16) , 7139
Abstract
Ti6Al4V is a widely used alloy due to its excellent mechanical qualities and resistance to corrosion, which make it fit for automotive, aerospace, defense, and biomedical sectors. Due to its high strength and limited heat conductivity, it is difficult to machine. Both the workpiece’s and the electrode’s conductivity are important factors that impact the electro-discharge machining (EDM) process. In this case, the machining efficiency is also influenced by the electrode selection. As a result, choosing the right electrode and machining parameters is essential to improving EDM performance on the Ti6Al4V alloy. Research on EDM for Ti6Al4V is limited, with little focus on electrode material selection and shape. The impact of EDM settings on MRR, TWR, and surface roughness is complex, and a comprehensive optimization strategy is needed. Copper electrodes are widely used, but further investigation is needed on EDM’s effects on Ti6Al4V’s surface properties and surface integrity. Addressing these research gaps will improve the understanding and application of EDM for Ti6Al4V, focusing on parameter optimization, surface integrity, and thermal and mechanical effects. By employing copper tools to optimize four crucial EDM process parameters—peak current, duty cycle, discharge current, and pulse-on time—this research aims to increase surface integrity and machining performance. A comprehensive Taguchi experimental design is used to systematically alter the EDM settings. By optimizing parameters using tolerance intervals and response modelling, the recently developed RAMS-RATMI approach improves the dependability of the EDM process and increases machining efficiency. With the optimized EDM settings, there were notable gains in depth of cut enhancement, surface roughness minimization, tool wear rate (TWR) reduction, and material removal rate (MRR). The results of the surface integrity examination showed fewer heat-affected zones, fewer microcracks, and a thinner recast layer. Analysis of variance was used to verify the impact and resilience of the optimized parameters. Superior machining performance, higher surface quality, and increased operational dependability were attained with the Ti6Al4V-optimized EDM process, providing industry practitioners with insightful information and useful recommendations.Keywords
This publication has 35 references indexed in Scilit:
- Optimization of hybrid Al-MMC drilling using a new RAMS-RATMI-based approachInternational Journal on Interactive Design and Manufacturing (IJIDeM), 2023
- Performance evaluation of surfactant mixed dielectric and process optimization for electrical discharge machining of titanium alloy Ti6Al4VCIRP Journal of Manufacturing Science and Technology, 2023
- Methods and variables in Electrical discharge machining of titanium alloy – A reviewHeliyon, 2020
- Effect of different tool materials during EDM performance of titanium grade 6 alloyEngineering Science and Technology, an International Journal, 2018
- Effects of Tool Electrode on EDM Performance of Ti-6Al-4VSilicon, 2018
- Optimization the machining parameters by using VIKOR Method during EDM process of Titanium alloyMaterials Today: Proceedings, 2018
- Process parameter optimization of die-sinking EDM on Titanium grade – V alloy (Ti6Al4V) using full factorial design approach.Materials Today: Proceedings, 2017
- Multi Process Parameter Optimization of Diesinking EDM on Titanium Alloy (Ti6Al4 V) Using Taguchi ApproachMaterials Today: Proceedings, 2015
- An experimental investigation on surface finish in die-sinking EDM of Ti-5Al-2.5SnThe International Journal of Advanced Manufacturing Technology, 2014
- Simultaneous optimisation of multiple performance characteristics in micro-EDM drilling of titanium alloyThe International Journal of Advanced Manufacturing Technology, 2012