CSChitrasen Samantra

Chitrasen Samantra

*This is an algorithmically generated author record based on publicly available information.

Chitrasen Samantra has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Recent Advances in High-Performance Bioinspired Sustainable Materials for Automotive Applications

    by Kanchan Kumari, Swastik Pradhan, Monalin Mishra, Abhishek Barua, Chitrasen Samantra, Trilochan Rout, Manisha Priyadarshini

    Electrified mobility regulations and lifecycle emissions targets have increased the demand for lightweight structural materials in vehicle architectures. Bioinspired composite materials offer microstructural configurations that alter conventional trade-offs among specific stiffness, crash energy absorption, and manufacturing energy requirements. This review evaluates the translation of biological structural archetypes including nacre, bamboo, cortical bone, and lotus leaves into load-bearing and functional automotive components. Quantitative benchmarks of continuous natural-fiber laminates, bio-cellular lattices, and mycelium-based acoustic cores are compared against high-strength steel and aluminum alloys. Key mechanical and functional metrics, including specific energy absorption (ranging from 35 to 48 kJ kg−1 for bioinspired crash structures), dynamic loss factors, and Cassie-Baxter superhydrophobic surface stability, are evaluated alongside high-throughput manufacturing routes such as high-pressure resin transfer molding (HP-RTM) and additive manufacturing. Methodological parameters for ISO 14040/14044-compliant Life Cycle Assessment (LCA) are synthesized, emphasizing component-level functional units over gravimetric mass equivalence. Furthermore, operational boundaries, specifically hygrothermal interfacial degradation, matrix glass transitions (Tg < 120 °C), and multi-axial loading sensitivity, are systematically outlined to define design limits for automotive deployment.


  • Optimizing tribological properties of 3D-printed thermoplastics through process parameters and microstructural insights

    by Kanchan Kumari, Swastik Pradhan, Chitrasen Samantra, Abhishek Barua, Siba Prasad Padhy, Sibam Nayak, Snehalata Sahu, Manas Das, Gyanendra Mohan Das

    The process of additive manufacturing (AM) and fuzed deposition modeling (FDM, in particular), has become a promising approach to manufacturing complex products with biodegradable materials like polylactic acid (PLA). Nevertheless, the tribological performance of FDM-printed PLA components is still a severe limitation of functional use. This research experimentally studied the tribological performances of the PLA + and carbon-fiber-reinforced PLA (PLA Pro CF) fabricated through FDM. Pin-on-disk tribometer A group trial of cylindrical specimens was conducted in line with the standards of ASTM G99- 04. Five key printing parameters, layer thickness, raster angle, material type, infill pattern, and infill percentage were varied across 24 experimental runs. ANOVA and multi-criteria decision-making using the Combined Compromise Solution (CoCoSo) method wase employed to analyze surface roughness, frictional force, coefficient of friction (COF), and wear. The results indicate that raster angle (26.36%) and infill percentage (17.01%) are the most influential parameters affecting tribological performance. The optimal parameter combination, layer thickness of 0.2 mm, raster angle of 30°, PLA + material, full honeycomb infill pattern, and 50% infill, resulted in a 40.28% reduction in surface roughness, 22.21% reduction in frictional force, 28.22% reduction in coefficient of friction (COF), and 9.17% reduction in wear compared to the average of all experimental runs. This optimal configuration represents the best compromise among all considered performance responses. FESEM analysis showed that PLA + had an abrasive-adhesive wear whereas PLA Pro CF had enhanced wear resistance owing to the strength of carbon fiber. The findings demonstrate that carbon fiber reinforcement significantly enhances the tribological performance of FDM-printed PLA components.


  • Open Access

    Emerging Trends in Ultrasonic and Friction Stir Spot Welding of Polymers and Metal-Polymer Hybrids: A Review of Process Mechanics, Microstructure, and Joint Performance

    by Kanchan Kumari, Swastik Pradhan, Chitrasen Samantra, Manisha Priyadarshini, Abhishek Barua, Debabrata Dhupal

    The growing need for lightweight, multifunctional, and high-performance structures in the automotive, aerospace, electronics, and medical industries has driven the development of advanced joining technologies for polymers and metal-polymer combinations. Among these, ultrasonic welding (USW) and friction stir spot welding (FSSW) have emerged as promising solid-state techniques capable of producing reliable joints with minimal thermal degradation and enhanced interfacial bonding. This review focuses on recent developments in USW and FSSW of thermoplastics, fiber-reinforced composites, and hybrid metal–polymer systems, with a particular emphasis on process mechanics, microstructural evolution, and joint performance. The mechanisms of heat generation, material flow behavior, and consolidation are discussed in relation to key process parameters, including applied pressure, rotational speed, vibration amplitude, plunge depth, and dwell time. Microstructural transformations such as polymer chain orientation, recrystallization, interfacial diffusion, and defect formation are analyzed to establish process–structure–property relationships. Mechanical performance metrics, including lap shear strength, fatigue resistance, impact behavior, and environmental durability, are critically compared across different materials and welding methods. Furthermore, recent advances in numerical and thermo-mechanical modeling, in situ process monitoring, and data-driven optimization are discussed to highlight pathways toward predictive and scalable manufacturing. Current industrial applications and existing limitations such as challenges in automation, thickness constraints, and hybrid material compatibility are also evaluated. Finally, key research gaps and future directions are identified to improve joint reliability, sustainability, and broader industrial adoption of advanced solid-state welding technologies.

  • Fabrication, mechanical characterization, and wear optimization of Al6061-CSAp metal matrix composites using hybrid Taguchi-ARAS-Sunflower Algorithm Approach

    by Chitrasen Samantra, Swastik Pradhan, Kanchan Kumari, Siddharth Kumar Rana, Abhishek Barua

    The need to develop lighter, stronger, and less expensive engineering materials has compounded the move toward Aluminum metal matrix composites (AMMCs) in a variety of fields. With industries placing more emphasis on the sustainability, waste minimization and enhanced wear behavior, the incorporation of waste-based reinforcements with environmentally friendliness has turned out to be mandatory in the creation of next-generation AMMCs with better mechanical and tribological characteristics. In this direction, the current research explores AA6061 composite with commercially sourced coconut shell ash particulates (CSAp), a low-cost bio-waste substance through a combined experimental and optimization-based method to improve their mechanical and tribological properties and promote the objectives of the circular economy. The 5–15 wt% of CSAp composites were prepared by the stir casting method and tested at different loads and sliding distances with an aim of gaining insight into how the composites wear. Through a Taguchi L27 design, the load was the most dominant independent variable that influenced wear, which was also validated by ANOVA. The Additive Ratio Assessment (ARAS) technique with multiple criteria revealed that the combination of 10 N load, 10% CSAp, and 1000 m sliding distance was the most effective combination in terms of wear, wear rate, and friction responses. In order to optimize this optimum to the levels beyond the discrete experiment levels, the Sunflower Optimization (SFO) algorithm was utilized. SFO rapidly converged to a continuous optimum that was closely aligned and showcased great concurrence with Taguchi and ARAS forecasts. The good convergence emphasizes the consistency of the developed model and the steady and predictable behavior of the utility function of the system. Microstructural analysis verified the same CSAp dispersion and enhanced the bonding between matrices and particles and the reason behind less wear and constant formation of transfer films under low loading conditions. The innovative aspect of this work is that a combined Taguchi-ARAS-SFO framework is applied to a composite reinforced with market-available CSAp to provide a feasible and sustainable solution without involving any steps of processing of the ash. The implications of the findings are also applicable to lightweight automotive, aerospace, and machine components where wear resistance is of great importance. Altogether, this paper shows that CSAp-impregnated AA6061 composites could provide better performance at the same time promoting the economic and environmental-friendly development of the material.


  • Circular Economy Governance and Regulatory Framework

    by Lakshmi Prasad Panda, Kali Charan Rath, N. V. Jagannadha Rao, Chitrasen Samantra, Kamalakanta Muduli


  • Open Access

    Parametric Investigation of Die-Sinking EDM of Ti6Al4V Using the Hybrid Taguchi-RAMS-RATMI Method

    by Chitrasen Samantra, Abhishek Barua, Swastik Pradhan, Kanchan Kumari, Pooja Pallavi

    Ti6Al4V is a widely used alloy due to its excellent mechanical qualities and resistance to corrosion, which make it fit for automotive, aerospace, defense, and biomedical sectors. Due to its high strength and limited heat conductivity, it is difficult to machine. Both the workpiece’s and the electrode’s conductivity are important factors that impact the electro-discharge machining (EDM) process. In this case, the machining efficiency is also influenced by the electrode selection. As a result, choosing the right electrode and machining parameters is essential to improving EDM performance on the Ti6Al4V alloy. Research on EDM for Ti6Al4V is limited, with little focus on electrode material selection and shape. The impact of EDM settings on MRR, TWR, and surface roughness is complex, and a comprehensive optimization strategy is needed. Copper electrodes are widely used, but further investigation is needed on EDM’s effects on Ti6Al4V’s surface properties and surface integrity. Addressing these research gaps will improve the understanding and application of EDM for Ti6Al4V, focusing on parameter optimization, surface integrity, and thermal and mechanical effects. By employing copper tools to optimize four crucial EDM process parameters—peak current, duty cycle, discharge current, and pulse-on time—this research aims to increase surface integrity and machining performance. A comprehensive Taguchi experimental design is used to systematically alter the EDM settings. By optimizing parameters using tolerance intervals and response modelling, the recently developed RAMS-RATMI approach improves the dependability of the EDM process and increases machining efficiency. With the optimized EDM settings, there were notable gains in depth of cut enhancement, surface roughness minimization, tool wear rate (TWR) reduction, and material removal rate (MRR). The results of the surface integrity examination showed fewer heat-affected zones, fewer microcracks, and a thinner recast layer. Analysis of variance was used to verify the impact and resilience of the optimized parameters. Superior machining performance, higher surface quality, and increased operational dependability were attained with the Ti6Al4V-optimized EDM process, providing industry practitioners with insightful information and useful recommendations.


  • Wear behavioral assessment of Al-CSAp-MMCs using grey-fuzzy approach

    by Siva Sankara Raju, G. Srinivasa Rao, Chitrasen Samantra


  • Analysis of occupational health hazards and associated risks in fuzzy environment: a case research in an Indian underground coal mine

    by Chitrasen Samantra, Saurav Datta, Siba Sankar Mahapatra

    This paper presents a unique hierarchical structure on various occupational health hazards including physical, chemical, biological, ergonomic and psychosocial hazards, and associated adverse consequences in relation to an underground coal mine. The study proposes a systematic health hazard risk assessment methodology for estimating extent of hazard risk using three important measuring parameters: consequence of exposure, period of exposure and probability of exposure. An improved decision making method using fuzzy set theory has been attempted herein for converting linguistic data into numeric risk ratings. The concept of ‘centre of area’ method for generalized triangular fuzzy numbers has been explored to quantify the ‘degree of hazard risk’ in terms of crisp ratings. Finally, a logical framework for categorizing health hazards into different risk levels has been constructed on the basis of distinguished ranges of evaluated risk ratings (crisp). Subsequently, an action requirement plan has been suggested, which could provide guideline to the managers for successfully managing health hazard risks in the context of underground coal mining exercise.


  • Interpretive structural modelling of critical risk factors in software engineering project

    by Chitrasen Samantra, Saurav Datta, Siba Sankar Mahapatra, Bikash Ranjan Debata

    Purpose: – Success of software projects depends on identification of project risks and managing the risks in a proactive manner. Risk management requires thorough insights into interrelationship of various risk factors for proposing strategies to minimize failure rate. The purpose of this paper is to develop a comprehensive structural model to interrelate important risk factors affecting the success of software projects. Design/methodology/approach: – Specifically, this study reveals how interpretive structural modelling helps the risk managers in identifying and understanding the interrelationship among various risk factors. A total of 23 risk factors (or risk sources) have been identified through an extensive literature review. Findings: – Necessary modelling information has been gathered from expert through a structured questionnaire survey. Matrice d’Impacts croises-multipication appliqué an classment analysis has been employed to classify the risk factors into four clusters such as autonomous, dependent, linkage and independent based on their driving and dependence power. Risk factors with strong dependence and weak driving power need urgent attention from managerial perspective. Originality/value: – The proposed model is useful for software managers/practitioners to address risk factors associated with complicated projects.