A 14 nm SRAM Using NMOS Header Assist Cell for Improved Write Ability and Reduced Cell Retention Leakage With Minimal Power Overhead
- 25 April 2025
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (2) , 724-735
Abstract
This article presents an NMOS header assist cell (NHAC) that lowers static random access memory (SRAM) minimum operating voltage ( $V_{\text {MIN}}$ ) with minimal power overhead for low-power applications, even in the case of increased interconnect resistance ( $R_{\text {INT}}$ ) with technology scaling. The proposed NHAC, featuring a Bitcell-compatible layout, is inserted between cell arrays to supply power by dividing cell-power (CVDD) into sub-arrays without additional dummy cells or white space. NHAC improves write ability even in high $R_{\text {INT}}$ cases, thanks to the continuous self-collapse of the CVDD voltage by supplying cell power through NMOS during write operations. The NMOS header in NHAC prevents excessive CVDD voltage collapse, thus ensuring the dynamic data retention stability of column half-selected cells (CHSCs). Additionally, by enabling all NHACs in sleep mode, the CVDD voltage can be clamped below the supply voltage, thereby reducing bitcell retention leakage without additional area costs. SRAM macros with additional resistors were fabricated using a 14 nm FinFET process to measure the impact of $R_{\text {INT}}$ on the write assist circuits. NHAC achieves a $V_{\text {MIN}}$ improvement of 210 mV with 4% power overhead, even in the high $R_{\text {INT}}$ case. In sleep mode, NHAC reduces bitcell retention leakage by 25% at 0.65 V and up to 61% at 1 V. NHAC demonstrates improved write $V_{\text {MIN}}$ similar to transient voltage collapse (TVC) write assist. Additionally, it achieves low-power overhead similar to self-induced voltage collapse (SIC) write assist.Keywords
Funding Information
- Samsung (IO201211-08089-01)
This publication has 22 references indexed in Scilit:
- A 14nm SRAM Using NMOS Header Assist Cell for Improved Write Ability and Reduced Cell Retention Leakage2024
- Critical Process Features Enabling Aggressive Contacted Gate Pitch Scaling for 3nm CMOS Technology and Beyond2022
- 24.3 A 3nm Gate-All-Around SRAM Featuring an Adaptive Dual-BL and an Adaptive Cell-Power Assist Circuit2021
- A 7nm FinFET SRAM using EUV lithography with dual write-driver-assist circuitry for low-voltage applications2018
- 12.3 A low-power and high-performance 10nm SRAM architecture for mobile applications2017
- 12.1 A 7nm 256Mb SRAM in high-k metal-gate FinFET technology with write-assist circuitry for low-VMIN applications2017
- 13.2 A 14nm FinFET 128Mb 6T SRAM with VMIN-enhancement techniques for low-power applications2014
- 13.5 A 16nm 128Mb SRAM in high-κ metal-gate FinFET technology with write-assist circuitry for low-VMIN applications2014
- A 20nm 112Mb SRAM in High-к metal-gate with assist circuitry for low-leakage and low-VMIN applications2013
- A 90-nm Low-Power 32-kB Embedded SRAM With Gate Leakage Suppression Circuit for Mobile ApplicationsIEEE Journal of Solid-State Circuits, 2004