Identification and Optimization Study of Cavitation in High Power Torque Converter
Open Access
- 16 May 2024
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 14 (10) , 4240
Abstract
Aiming at the phenomenon that a high-power torque converter is susceptible to cavitation, which leads to performance degradation, first, a transient flow field model of the torque converter is established, and CFD simulation and experimental research on the torque converter are carried out to find out the speed ratio region where cavitation occurs in the torque converter as well as the rule of occurrence of cavitation, and then the cavitation identification method based on the difference between the inlet and outlet flow of the torque converter is proposed. Then, the transient flow process inside the torque converter is analyzed, and it is pointed out that the angle between the inlet angle of the stator and the outlet angle of the turbine of the torque converter, i.e., the fluid inflow injection deviation angle is an important factor affecting the cavitation phenomenon. By adjusting the key parameters of the stator blade bone line, the fluid inflow deviation angle of the torque converter stator is optimized, so that the speed ratio range of cavitation under large load conditions is greatly reduced from the original 0–0.5 (50%) to 0–0.15 (15%). Meanwhile, in terms of test performance, the nominal torque of the torque converter is greatly improved under the premise of ensuring that the performance is basically unchanged, in which the nominal torque of the test zero speed is increased by 28.7%, and the cavitation of the torque converter has been greatly improved.Keywords
Funding Information
- “Two Chain” Enterprise (Institute) Collaboration Main Project of Shaanxi Province (2022LL-JB-21, 2022KXJ-029)
- Shaanxi Province QinChuangYuan “Scientist + Engineer” Team Construction Support Project (2022LL-JB-21, 2022KXJ-029)
This publication has 14 references indexed in Scilit:
- Detection and evaluation of cavitation in the stator of a torque converter using pressure measurementPhysics of Fluids, 2022
- Transmission Fluid Properties’ Effects on Performance Characteristics of a Torque Converter: A Computational StudyTribology Transactions, 2021
- Effect of the blade shaped by Joukowsky airfoil transformation on the characteristics of the torque converterProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2021
- Multi-objective optimization of the cascade parameters of a torque converter based on CFD and a genetic algorithmProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2021
- Analysis of the Influence of the Number of Torque Converter Blades on Working Performance Based on the Response Surface MethodJournal of Physics: Conference Series, 2021
- On the application of passive flow control for cavitation suppression in torque converter statorInternational Journal of Numerical Methods for Heat & Fluid Flow, 2019
- Kriging-assisted design optimization of the impeller geometry for an automotive torque converterStructural and Multidisciplinary Optimization, 2017
- CFD investigating medium-temperature influences on performance prediction and structure stress calculation in a hydrodynamic torque converterNumerical Heat Transfer, Part A: Applications, 2017
- Cavitation simulation of automotive torque converter using a homogeneous cavitation modelEuropean Journal of Mechanics - B/Fluids, 2017
- Effects of cavitation on performance of automotive torque converterAdvances in Mechanical Engineering, 2016