WMWenxing Ma

Wenxing Ma

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wenxing Ma has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Hardware-in-the-Loop Simulation Research on Adaptive Control Strategy for Traveling Power of Hydrostatic Harvesters

    by Jichen Xie, Wenxing Ma, Zhongshan Wang, Haoji Song, Xin Wang

    Conventional harvesters usually depend on the operator’s expertise to manually manage the power allocation between the harvesting and traveling system, which results in problems like high subjectivity, labor intensity, and sensitivity to terrain. To overcome issues such as inadequate power and power mismatches between harvesting and traveling on gentle slopes, this study introduces a hydrostatic four-wheel-drive system featuring a single variable pump paired with two variable motors, improving the vehicle’s capability to handle complex terrains. Building on this system, an adaptive power allocation method for traveling is proposed. This method dynamically adjusts the power distribution between traveling and harvesting according to changing terrain conditions, giving priority to harvesting power while controlling vehicle and engine speeds to avoid engine stalls, thereby enhancing operational quality and efficiency. A model of the full vehicle system is created using Amesim 2410, and a comparation of adaptive control and constant speed control is modeled under a hardware-in-the-loop environment. The simulation results show that the proposed control approach effectively manages power distribution across different slopes and speeds, and avoids engine stalling, providing valuable technical guidance for power coordination control in harvesters working on gentle slopes.


  • Open Access

    Identification and Optimization Study of Cavitation in High Power Torque Converter

    by Kaifeng Wang, Xiangyang Xu, Weiwei Zhao, Zhongshan Wang, Yulong Lei, Wenxing Ma

    Aiming at the phenomenon that a high-power torque converter is susceptible to cavitation, which leads to performance degradation, first, a transient flow field model of the torque converter is established, and CFD simulation and experimental research on the torque converter are carried out to find out the speed ratio region where cavitation occurs in the torque converter as well as the rule of occurrence of cavitation, and then the cavitation identification method based on the difference between the inlet and outlet flow of the torque converter is proposed. Then, the transient flow process inside the torque converter is analyzed, and it is pointed out that the angle between the inlet angle of the stator and the outlet angle of the turbine of the torque converter, i.e., the fluid inflow injection deviation angle is an important factor affecting the cavitation phenomenon. By adjusting the key parameters of the stator blade bone line, the fluid inflow deviation angle of the torque converter stator is optimized, so that the speed ratio range of cavitation under large load conditions is greatly reduced from the original 0–0.5 (50%) to 0–0.15 (15%). Meanwhile, in terms of test performance, the nominal torque of the torque converter is greatly improved under the premise of ensuring that the performance is basically unchanged, in which the nominal torque of the test zero speed is increased by 28.7%, and the cavitation of the torque converter has been greatly improved.


  • Open Access

    Design and Control Performance Optimization of Variable Structure Hydrostatic Drive Systems for Wheel Loaders

    by Xin Wang, Zhongyu Wang, Songlin Wang, Wei Cai, Qingjie Wu, Wenxing Ma

    The traditional loader drive system is based on the hydraulic torque converter as the key component, and its gear is shifted through the coordination of the clutch and gearbox, which greatly increases power loss and operator fatigue. To address the above problem, a variable-structure hydrostatic drive system is proposed. This system adopts a closed-loop design and adjusts the displacement of the pump and dual motors to follow the throttle opening of the vehicle, achieving automatic gear shifting and smooth speed regulation. It can also automatically change the system structure according to the vehicle’s speed, meeting the vehicle’s demand for rapid switching output of high torque and high speed. At the same time, in the displacement matching control process, an adaptive sliding mode control scheme based on radial basis function neural network compensation is proposed. This scheme designs an adaptive hyperparameter update strategy according to the characteristics of the system to effectively compensate for changes in uncertain factors. Experimental results show that, compared to traditional drive systems, this system has the characteristics of simple operation, smooth speed regulation, and high fuel economy.


  • Open Access

    Research on the New Hydrostatic Transmission System of Wheel Loaders Based on Fuzzy Sliding Mode Control

    by Xin Wang, Zhongyu Wang, Lei Xie, Songlin Wang, Zhongshan Wang, Wenxing Ma

    To improve the control performance and energy efficiency of the hydrostatic transmission (HST) system of wheel loaders, this study proposes a novel variable structure dual-motor hydrostatic transmission system, accompanied by a multivariable control strategy based on fuzzy sliding mode control. By constructing a simulation model of the transmission system, the performance of the novel transmission system is verified, and the control effects of common control strategies are compared. The simulation results show that the proposed control strategy and system have good matching and can adapt to disturbances actively. Field experiment results show that the proposed solution can achieve smooth automatic shifting of wheel loaders, while effectively adjusting system pressure, flow, and power. Compared with the traditional hydrodynamic torque converter loader transmission system, its transmission efficiency is effectively increased by 30%, and the efficiency is increased by 8% compared with the traditional hydrostatic transmission system This achievement is of great significance for improving the working efficiency of wheel loaders and reducing energy consumption. The future research focus is to further improve the multivariable control strategy, achieve intelligent operation, and improve the efficiency and reliability of the transmission system.


  • Open Access

    Leveling Control of Hillside Tractor Body Based on Fuzzy Sliding Mode Variable Structure

    by He Peng, Wenxing Ma, Zhongshan Wang, Zhe Yuan

    To address the issues that arise when auto-leveling the vehicle body of a hillside tractor under complex working conditions, an auto-leveling control system was developed based on a newly developed hillside tractor and four-point body leveling mechanism. In this approach, leveling accuracy and stability were improved by adopting a sliding mode variable structure control algorithm based on fuzzy switching gain adjustment to achieve real-time dynamic auto-leveling control. To obtain curves of front and rear axle leveling displacement, speed, flow, pressure and body tilting angle during the leveling process, AMEsim/Simulink co-simulation was used to simulate and analyze the control system. The simulation results revealed that the tractor achieves a good leveling effect under complex working conditions in hilly and mountainous areas; the tractor can remain within a ±2° tilting angle range during the leveling process and can return to 0° after leveling, demonstrating good dynamic stability. To further assess the algorithm, a model of the system was submitted to live-testing on a custom-built auto-leveling test bench. Comparison of the test and simulation results revealed a close agreement between the two, indicating that the self-leveling control system and control algorithm developed in this study have high leveling accuracies. The results reported in this paper could provide assistance with or in reference to obtaining solutions to the problems of tractor body leveling in hilly and mountainous areas.


  • Open Access

    Multi-Objective Optimization Design for a Novel Parametrized Torque Converter Based on an Integrated CFD Cascade Design System

    by Zilin Ran, Wenxing Ma, Kaifeng Wang, Bosen Chai

    Advanced cascade design theories and methods are crucial to the rapid development of torque converters. Therefore, the study proposed a new parametric design method for a hydrodynamic torque converter cascade. The method is embodied by using a cubic non-uniform rational B-splines (NURBS) open curve and closed curve, respectively, to carry out the parametric design of the unit blade camberline and unit blade thickness distribution, and the curvature of the designed blade curve is continuous. Then, the author developed batch and script files in the Isight platform for a fully automated integrated design of the hydrodynamic torque converter, including cascade parametric modeling, meshing, computational fluid dynamics (CFD) simulation, post-processing, and optimization design. A three-dimensional cascade integrated optimization design system of the hydrodynamic torque converter is established with CFD technology as the bottom layer design, a control file as the middle layer, and an optimization algorithm as the top layer drive. Finally, multi-objective optimization was carried out for the key cascade parameters (camberline peak height). Compared with the original blade, the optimized NURBS blade increased by 7.207% in high-efficiency region width (Gη), and the optimized blade increased by 2.673% in peak efficiency (ηmax) to meet the actual engineering requirements. The new parametric design method of the blade shape and the integrated optimization design system of a three-dimensional cascade of torque converter proposed in this paper significantly reduces the design costs and shortens the design cycle of the torque converter, which will provide a valuable reference for engineers of turbomachinery.


  • Open Access

    Design Approach and Mechanism Analysis for Cavitation-Tolerant Torque Converter Blades

    by Zilin Ran, Wenxing Ma, Chunbao Liu

    As the development of hydrodynamic torque converters (HTCs) points toward increasing the pump input power and pump rotation speed, the negative effects of cavitation are worsening. Most studies focus on suppressing fluid machinery cavitation to attenuate the negative effects of cavitation, such as noise, vibration, and blade damage. Therefore, we proposed two stator cavitation suppression slotting methods to suppress stator cavitation in HTCs: (1) slotting both sides of the pressure and suction sides and (2) slotting one side of the suction side. The key design parameters are analyzed, including the slot width and slot position of the stator blade. Findings show that a wider slot enlarges the mass flow rate ventilation through the slot, thus reducing the cavitation risk but decreasing the hydrodynamic performance. The most effective slot position for the second proposed method (slotting one side of the suction side) is between S0.15 (stator suction side dimensionless distance 0.15 location) and S0.6 (stator blade suction side); here, the stator cavitation can be suppressed completely. The capacity factor (Tbg) and torque ratio (K) are decreased by 6.81% and 3.23%, respectively, under the stalling speed ratio, whereas the stator cavitation almost completely disappears. Therefore, the new method of slotting one side of the stator suction side completely suppresses the stator cavitation and significantly shortens the cavitation duration. The new method of slotting one side of the blade suction side can serve as a reference for turbomachinery design.


  • Open Access

    3D Cavitation Shedding Dynamics: Cavitation Flow-Fluid Vortex Formation Interaction in a Hydrodynamic Torque Converter

    by Zilin Ran, Wenxing Ma, Chunbao Liu

    Recent experiments have shown interactions between the cavitation and fluid vortex formation in a hydrodynamic torque converter. This study aimed to clarify the unsteady cavitation trigger mechanism and flow-induced vibration caused by turbulence–cavitation interactions. The mass transfer cavitation model and modified Reynolds-averaged Navier–Stokes k–ω model were used with a local density correction for turbulent eddy viscosity to investigate the cavitation structure in a hydrodynamic torque converter under various operating conditions. The model results were then validated against test data. The multi-block structured gridding technique was used to develop an orthogonally structured grid of a three-dimensional full-flow passage as an alternative analysis method for the cavitation flow. The results indicated that the re-entrant jet is the main cause of the shedding cavitation and breaking O-type cavitation. The re-entrant jet is driven by the reverse pressure gradient to move upstream towards the stator nose, and it lifts and splits the attached cavitation, which periodically induces shedding cavitation. When the cavitation was considered, the prediction error of the capacity constant was reduced from 13.23% to <5%. This work provides an insight into the cavitation–vortex interactions in a hydrodynamic torque converter, which can be used to improve the prediction accuracy of the hydrodynamic performance.


  • Open Access

    Slip theory-based numerical investigation of the fluid transport behavior on a surface with a biomimetic microstructure

    by Jiaxin Wang, Wenxing Ma, Xiaomei Li, Weiyang Bu, Chunbao Liu

    This paper presented a numerical simulation of drag reduction on a superhydrophobic surface with a groove structure. The computational fluid dynamics (CFD) method was used to analyze the effect of the groove microstructure when droplets impacted a superhydrophobic surface. The simulation results revealed three main characteristics: (1) The distance the droplet spread was larger along the direction parallel to the groove and smaller perpendicular to the groove; (2) Two protruding small spheres were formed at the edge of the droplet along the groove direction; (3) During retraction, the droplets presented a narrow, cross-shaped morphology. The effect of the groove structure in the two-dimensional microchannel on drag reduction near the wall was analyzed based on slip theory by the coupled level set/volume of fluid (CLSVOF) method. The air in the superhydrophobic pit formed a low-velocity vortex, which made the fluid roll on the air surface. The rolling on the surface produced a velocity slip at the gas–liquid interface. In addition, the superhydrophobic surface had an obvious drag reduction effect in the laminar flow state, but the drag reduction effect in the turbulent state was not ideal and even increased the flow resistance at the wall.


  • Open Access

    Large eddy simulation for improvement of performance estimation and turbulent flow analysis in a hydrodynamic torque converter

    by Chunbao Liu, Jing Li, Weiyang Bu, Wenxing Ma, Guang Shen, Zhe Yuan

    Computational fluid dynamics (CFD) has been widely applied as an effective tool for optimizing products and reducing production cycles in many industrial fields; consequently, engineers are constantly pursuing higher accuracy in the performance predictions of CFD methods. In this paper, an analysis for the flow field of a hydrodynamic torque converter (TC) is conducted to evaluate CFD applications in detail. In the past, Reynolds-averaged Navier–Stokes (RANS) simulations have always played a dominant role in the numerical modeling of TCs because of their efficient calculation speed. However, most RANS models are unable to capture the complicated transient flows whose performance estimation errors are generally greater than 10%. Therefore, large eddy simulation (LES) with various sub-grid scale (SGS) models are applied in order to explore feasible methods for improving numerical accuracy and capturing the detailed transient flow phenomena. The effectiveness of the LES method is verified by comparing the numerical results with experimental data. Although the grid resolution is not fine enough due to the limitations of the high-performance computer (HPC) used, LES with dynamic kinetic energy transport (KET) models were still able to obtain an excellent description of both the near-wall flow and the main-stream flow via quantitative and qualitative analyses. The maximum error in the capacity factor (CF) is remarkably reduced to 4.4%. It is therefore beyond doubt that applying LES methods using coarser grid resolutions can still guarantee higher prediction accuracy through the reasonable selection of SGS models, which can effectively reduce the computing capacity requirements and contribute to the design process of TCs.