Investigation on Flexural Behavior of Galvanized Cold-Formed Steel Beams Exposed to Fire with Different Stiffener Configurations
Open Access
Abstract
Cold-formed steel (CFS) sections, increasingly favored in the construction industry due to their numerous advantages over hot-rolled steel, have received limited attention in research concerning the flexural behavior of galvanized iron (GI)-based CFS at elevated temperatures. Understanding how these materials and structures behave under elevated temperatures is crucial for fire safety. The authors have performed experimental studies previously on GI-based CFS under elevated temperatures. In that study, CFS sections made of GI of grade E350 of 1.5 m long and 2 mm thickness were used. Built-up beam sections were tested under two-point loading after heating to 60 and 90 min durations and subsequently cooling them down using air and water. This study aims to uncover the influence of different stiffener configurations on the load carrying capacity of sections under elevated temperature parametrically. With the experimental study results from previous studies as a reference, authors used FEM analysis to comprehensively study the behavior of GI-based CFS sections under fire. Vertical, horizontal, and not providing a stiffener were the configurations selected to study the beams parametrically. Parametric analysis confirmed that different stiffener configurations did not alter the predominant failure mode, which remained distortional buckling across all specimens. Beams with vertical stiffeners demonstrated superior performance compared to those with horizontal stiffeners in parametric analysis. Lateral–torsional buckling was observed in the reference specimen, lacking stiffeners due to inadequate restraint at the supports.Keywords
This publication has 25 references indexed in Scilit:
- Post-fire flexural behaviour and performance of unrestrained cold-formed steel built-up section beams: Experimental and numerical investigationCase Studies in Construction Materials, 2023
- Flexural behaviour of cold-formed steel square and rectangular hollow sections with moderate heat-treatmentJournal of Constructional Steel Research, 2022
- Design of cold-formed ferritic stainless steel RHS perforated beamsEngineering Structures, 2022
- Flexural behaviour of cold-formed steel oval hollow section beamsJournal of Constructional Steel Research, 2021
- Behaviour and design of cold-formed steel built-up section beams with different screw arrangementsThin-Walled Structures, 2018
- Distortional failure and DSM design of cold-formed steel lipped channel beams under elevated temperaturesThin-Walled Structures, 2016
- Experimental and numerical analysis on the structural behaviour of cold-formed steel beamsThin-Walled Structures, 2013
- Behaviour and design of cold-formed steel beams subject to lateral–torsional buckling at elevated temperaturesThin-Walled Structures, 2012
- Experimental and numerical investigation on cold-formed steel C-section flexural membersJournal of Constructional Steel Research, 2009
- Experimental investigation of cold-formed steel material at elevated temperaturesThin-Walled Structures, 2007