Corrosion-Resistant Aluminum Alloy Design Strategy Using Combination of Galvanostatic Test and Quadratic Regression Analysis
- 26 February 2026
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (4) , 041502
Abstract
This study focuses on the design and evaluation of corrosion-resistant aluminum alloys using galvanostatic test and quadratic regression analysis. Al-Zr and Al-Mn-Zr alloys were evaluated through both galvanostatic and immersion tests. The galvanostatic test effectively simulated localized corrosion mechanisms, reducing testing duration from hundreds or thousands of hours to just tens of hours. Scanning Kelvin probe force microscopy and scanning electron microscopy/energy-dispersive spectroscopy analyses revealed that alloys with higher potential differences between precipitates and the Al matrix showed increased susceptibility to localized corrosion. A quadratic regression model was developed to describe the relationship between maximum pit depth and the contents of Zr and Mn, achieving a high coefficient of determination (R 2 = 0.975). The model identified an optimal alloy composition of 0.16 wt% Zr and 0.41 wt% Mn, resulting in a minimized pit depth of 24.40 μm. This research demonstrates that combining the galvanostatic test with regression analysis shortens the required time for development of corrosion-resistant aluminum alloys, providing a framework for optimizing compositions and predicting corrosion resistance.Keywords
Funding Information
- Korea Evaluation Institute of Industrial Technology (RS-2023-00285009)
This publication has 34 references indexed in Scilit:
- Effect of B addition on the formation of Fe-rich phases in Al-Si-Fe alloysJournal of Alloys and Compounds, 2022
- Tensile strength prediction of aluminium alloys welded by FSW using response surface methodology – Comparative reviewMaterials Today: Proceedings, 2021
- Optimization of the corrosion property of a high entropy alloy using response surface methodologyMaterials Today: Proceedings, 2021
- Improvement of corrosion penetration resistance for aluminum heat exchanger by alloying zirconiumMaterials Chemistry and Physics, 2020
- Influence of sustained load on corrosion characteristics of reinforced concrete beams under galvanostatic accelerated corrosionConstruction and Building Materials, 2019
- Microstructural evolution of iron-rich intermetallic compounds in scandium modified Al-7Si-0.3Mg alloysJournal of Alloys and Compounds, 2017
- Localized corrosion (pitting): A model of passivity breakdown including the role of the oxide layer nanostructureCorrosion Science, 2008
- Effect of homogenization and alloying elements on recrystallization resistance of Al–Zr–Mn alloysMaterials Science and Engineering: A, 2007
- Effects of applied anodic potential and pH on the repassivation kinetics of pure aluminium in aqueous alkaline solutionJournal of Solid State Electrochemistry, 1999
- The use of very weak galvanostatic polarization to study localized corrosion stability in stainless steelCorrosion Science, 1994