YKYong-Won Kim

Yong-Won Kim

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yong-Won Kim has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Corrosion-Resistant Aluminum Alloy Design Strategy Using Combination of Galvanostatic Test and Quadratic Regression Analysis

    by Geon-Il Kim, Eun-Ha Park, Yong-Won Kim, Jung-Gu Kim

    This study focuses on the design and evaluation of corrosion-resistant aluminum alloys using galvanostatic test and quadratic regression analysis. Al-Zr and Al-Mn-Zr alloys were evaluated through both galvanostatic and immersion tests. The galvanostatic test effectively simulated localized corrosion mechanisms, reducing testing duration from hundreds or thousands of hours to just tens of hours. Scanning Kelvin probe force microscopy and scanning electron microscopy/energy-dispersive spectroscopy analyses revealed that alloys with higher potential differences between precipitates and the Al matrix showed increased susceptibility to localized corrosion. A quadratic regression model was developed to describe the relationship between maximum pit depth and the contents of Zr and Mn, achieving a high coefficient of determination (R 2 = 0.975). The model identified an optimal alloy composition of 0.16 wt% Zr and 0.41 wt% Mn, resulting in a minimized pit depth of 24.40 μm. This research demonstrates that combining the galvanostatic test with regression analysis shortens the required time for development of corrosion-resistant aluminum alloys, providing a framework for optimizing compositions and predicting corrosion resistance.

  • Effect of Current Flow on the Galvanic Corrosion in Electrical Parts of Electric Vehicles

    by Jeong-Min Lim, Eun-Ha Park, Yong-Won Kim, Byung-Su Kim, Seung-Ho Ahn, Jung-Gu Kim

    In this study, the effect of current flow through electrical parts on galvanic corrosion behavior was investigated. To predict the corrosion rate of galvanic coupled electrical parts, an equivalent circuit was constructed, encompassing both galvanic and external currents. Following the circuit, the corrosion current equation was formulated based on Kirchhoff’s law, which consists of the following parameters: external current, solution resistance, contact resistance, and galvanic cell voltage. To validate the formula, calculated mass loss was compared with the experimental mass loss after one week of immersion tests. According to the corrosion current formula, the contact resistance and galvanic cell voltage between the galvanic coupled materials should be minimized to reduce the corrosion failure of electrical parts.