Experimental Study on the Influence of Delay Time on Rock Fragmentation in Bench Blasting
Open Access
- 21 December 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 13 (1) , 85
Abstract
Delay time is an important factor in the quality of bench blasting. The development and application of electronic detonators make it possible to control the timing of detonation by a highly precise delay time. It is an easily achievable way to seek a better blast fragmentation by controlling the delay time. In order to investigate the influence of delay time on rock fragmentation, eight experiments on bench blasting models with double holes were carried out. The average weight of 4.59 g of pentaerythritol tetranitrate (PETN) was charged into each blast hole with a diameter of 10 mm. Delay times between the double holes were set as: 13.69, 27.36, 54.72, 60, 90, 120, 180, and 339.6 µs. During blast loading, the breakage processes of specimens were captured in detail by high-speed cameras. Full-field strains on the bench slope were analyzed by the three-dimensional digital image correlation (3D-DIC) technique. After each experiment, the coarse fragments were backfilled into the post-blast specimen to observe and record the bench slope’s final breakage pattern. The experimental results showed that the fragmentation of the bench slope transformed from horizontal crack dominance to vertical crack dominance as the delay time increased. In addition, post-blast fragments were collected and sieved, including fine materials. In the premise of approximate excavation, the optimum delay time was 180 µs. Compared to short delay times such as 27.36 µs, x50 was improved by approximately 25% at the delay time of 180 µs. The results showed a significant difference and great improvement in fragmentation when the delay times were in the time range of no-shock-wave interaction compared to interactions. When determining the optimum delay time in multi-hole blasting, except for the stress wave interaction, factors such as crack propagation should also be considered. The results of experiments could contribute to references for relevant research.Keywords
Funding Information
- National Natural Science Foundation of China (12002047, 51774043)
This publication has 43 references indexed in Scilit:
- A Review of Dynamic Experimental Techniques and Mechanical Behaviour of Rock MaterialsRock Mechanics and Rock Engineering, 2013
- Shock Wave Interactions in Rock Blasting: the Use of Short Delays to Improve Fragmentation in Model-ScaleRock Mechanics and Rock Engineering, 2012
- Investigation of the damage induced by desiccation and heating of Tournemire argillite using digital image correlationInternational Journal of Rock Mechanics and Mining Sciences, 2012
- Multiscale Full-Field Strain Measurements for Micromechanical Investigations of the Hydromechanical Behaviour of Clayey RocksStrain, 2010
- Volumetric Digital Image Correlation Applied to X‐ray Microtomography Images from Triaxial Compression Tests on Argillaceous RockStrain, 2007
- Controlled Fracture Growth by Blasting While Protecting Damages to Remaining RockRock Mechanics and Rock Engineering, 2006
- Timing effects on the fragmentation of small scale blocks of granodioriteFragblast, 2006
- Supersonic Detonation in Rock Mass - Part 2: Particle Displacements and Velocity Fields for Single and Multiple Non-Delayed and Delayed Detonating BlastholesFragblast, 2004
- The Use of Lagrange Diagrams in Precise Initiation Blasting. Part I: Two Interacting BlastholesFragblast, 2002
- Blast vibration control in the presence of delay scatter and random fluctuations between blastholesInternational Journal for Numerical and Analytical Methods in Geomechanics, 1993