Effect of Annealing Temperature on Microstructure and Corrosion Resistance of HVOF-Sprayed Fe-Based Amorphous–Nanocrystalline Coatings
Open Access
Abstract
In this work, a Fe-based amorphous coating (Fe44Cr18Mo7Ni4Cu2B20Si3C2) was fabricated via high-velocity oxygen fuel (HVOF) spraying, and the effect of annealing temperature on its microstructure, phase composition, and corrosion resistance in 3.5 wt.% NaCl solution was investigated. The as-sprayed (AS) coating exhibits an amorphous content of 85.71% and a porosity of 1.37%. Annealing at 540 °C (H540) reduces porosity to 0.98% without significant crystallization, whereas annealing at 640 °C (H640) and 740 °C (H740) triggers extensive crystallization (amorphous content drops to 24.18% and 19.20%), and porosity increases to 1.82% and 2.17%. Electrochemical tests show that corrosion resistance deteriorates progressively with increasing temperature. icorr increases from 3.56 μA/cm2 (AS) to 50.0 μA/cm2 (H740), while Rp decreases from 8472 to 669 Ω·cm2. EIS reveals that the AS coating is dominated by the inner barrier layer (Rb >> Rt), whereas annealing causes a drastic collapse of Rb (from 8.374 × 104 to 5.011 Ω·cm2). This degradation is attributed to crystallization-induced grain boundaries and reduced effective Cr content, which impair passive film integrity and accelerate corrosion.Keywords
Funding Information
- Science and Technology Bureau of Zhenjiang (GY2023045)
This publication has 44 references indexed in Scilit:
- Improved corrosion resistance and electrical characteristics of titanium, with atomic layer deposited (ALD) TiOx coatingApplied Surface Science, 2025
- Superior corrosion-resistant Zr-Ti-Ag thin film metallic glasses as potential biomaterialsApplied Surface Science, 2024
- Micromechanical Analysis of Metal-Ceramic Thin-Films on Steel SubstratesJOM, 2024
- Fe‐Based Amorphous Alloy Coatings: A ReviewAdvanced Engineering Materials, 2024
- Effect of HVOF Spraying Process on Particle Behavior of Fe-Based Amorphous Alloy CoatingsJournal of Thermal Spray Technology, 2022
- Effect of process conditions on spray dried calcium carbonate powders for thermal sprayingCeramics International, 2021
- In-situ TEM annealing of amorphous Fe-24at.%W coatings and the effect of crystallization on hardnessJournal of Materials Science, 2020
- Significantly enhanced resistance to SRB corrosion via Fe-based amorphous coating designed with high dose corrosion-resistant and antibacterial elementsCorrosion Science, 2020
- Effects of Fe-to-Co ratio on microstructure and mechanical properties of laser cladded FeCoCrBNiSi high-entropy alloy coatingsApplied Surface Science, 2018
- Ultimate strength analysis of aged steel-plated structures exposed to marine corrosion damage: A reviewCorrosion Science, 2014