Design and Fabrication of Ultrafine Piezoelectric Composites
- 1 January 2005
- journal article
- research article
- Published by SAGE Publications in Ultrasonic Imaging
- Vol. 27 (1) , 54-64
Abstract
Making fine scale (50 MHz) ultrasound transducers remains challenging. Interdigital phase bonding (IPhB), described in this paper, presents a new technique developed to make piezoelectric composites at the ultrafine scale using a conventional dicing saw. Using the IPhB technique, a composite structure with a pitch that is less than the dicing saw blade thickness can be created. The approach is flexible enough to make composites of different combination of pitch and volume ratio. Using a conventional dicing saw with a 50 μm thick blade, composite with a 25 μm pitch and a volume ratio of 61 percent are fabricated. Such a composite is suitable for fabrication of ultrasonic transducers and arrays with central frequencies of up to 85 MHz. Single element transducers working at central frequencies of 50–60 MHz were made of these composites as a mean to characterize the acoustic performance. Measurement results of the transducers show that the longitudinal electromechanical coupling coefficient is greater than 0.6 and that there are no noticeable lateral resonances in the frequency range of 55-150 MHz. Design criteria for fine scale elements are also discussed based on theoretical results from finite element analysis (FEA).Keywords
This publication has 11 references indexed in Scilit:
- Piezocomposite 30MHz linear array for medical imaging: design challenges and performances evaluation of a 128 elements array2005
- Development of a high frequency (35 MHz) linear ultrasonic array using 2-2 composite elements2005
- A comparison of model and experiment for a high frequency (35 MHz) linear ultrasonic array2004
- Laser micromachined high frequency ultrasonic arrays2003
- The role of piezocomposites in ultrasonic transducers2003
- A new ultrasound instrument for in vivo microimaging of miceUltrasound in Medicine & Biology, 2002
- A 30-MHz piezo-composite ultrasound array for medical imaging applicationsIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2002
- Interdigital pair bonding for high frequency (20-50 MHz) ultrasonic composite transducersIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2001
- Principles and applications of ultrasound backscatter microscopyIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1993
- Simulation of piezoelectric devices by two- and three-dimensional finite elementsIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1990