Interdigital pair bonding for high frequency (20-50 MHz) ultrasonic composite transducers
Authors:
- K.A. HarasiewiczKHK.A. Harasiewicz
- F.S. FosterFFF.S. Foster
- 1 January 2001
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
- Vol. 48 (1) , 299-306
Abstract
Interdigital pair bonding is a novel methodology that enables the fabrication of high frequency piezoelectric composites with high volume fractions of the ceramic phase. This enhancement in ceramic volume fraction significantly reduces the dimensional scale of the epoxy phase and increases the related effective physical parameters of the composite, such as dielectric constant and the longitudinal sound velocity, which are major concerns in the development of high frequency piezoelectric composites. In this paper, a method called interdigital pair bonding (IPB) is used to prepare a 1-3 piezoelectric composite with a pitch of 40 /spl mu/m, a kerf of 4 /spl mu/m, and a ceramic volume fraction of 81%. The composites prepared in this fashion exhibited a very pure thickness-mode resonance up to a frequency of 50 MHz. Unlike the 2-2 piezoelectric composites with the same ceramic and epoxy scales developed earlier, the anticipated lateral modes between 50 to 100 MHz were not observed in the current 1-3 composites. The mechanisms for the elimination of the lateral modes at high frequency are discussed. The effective electromechanical coupling coefficient of the composite was 0.72 at a frequency of 50 MHz. The composites showed a high longitudinal sound velocity of 4300 m/s and a high clamped dielectric constant of 1111/spl epsiv//sub 0/, which will benefit the development of high frequency ultrasonic transducers and especially high frequency transducer arrays for medical imaging.Keywords
This publication has 24 references indexed in Scilit:
- High frequency 1-3 composite transducers fabricated from alkoxide-derived PZT fibers2002
- 2–2 piezoelectric composites with high density and fine scale fabricated by interdigital pair bondingApplied Physics Letters, 1999
- Composite ultrasound transducer arrays for operation above 20 MHz1999
- Approximate model for wave propagation in piezoelectric materials. II. Fibrous compositesJournal of Applied Physics, 1999
- Resonance modes and losses in 1-3 piezocomposites for ultrasonic transducer applicationsJournal of Applied Physics, 1999
- Piezoceramics for high-frequency (20 to 100 MHz) single-element imaging transducersIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1997
- Overview of Fine‐Scale Piezoelectric Ceramic/Polymer Composite ProcessingJournal of the American Ceramic Society, 1995
- Novel Processing of 1‐3 Piezoelectric Ceramic/Polymer Composites for Transducer ApplicationsJournal of the American Ceramic Society, 1995
- Principles and applications of ultrasound backscatter microscopyIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1993
- Characterization of lead zirconate titanate ceramics for use in miniature high-frequency (20-80 MHz) transducersIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1991