Investigation of interlaminar toughening properties in carbon fiber composites using wet veil formation of short‐cut aramid fibers
- 7 January 2025
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 46 (9) , 8015-8024
Abstract
The application of carbon fiber reinforced polymer (CFRP) in aerospace, automotive and other fields is expanding rapidly due to its high strength‐to‐weight ratio and excellent mechanical properties. However, the susceptibility to delamination damage in the thickness direction still needs to be addressed urgently. In this study, carbon fiber prepregs were combined with short‐cut aramid fiber (SAFs) veils through hot compression molding to produce SAFs‐interlaminar‐toughened carbon fiber reinforced polymer (SAFs‐CFRP). The effect of the areal density of the SAFs on mechanical properties and model II interlaminar fracture toughness (IFT) was investigated. The results demonstrate that at a fiber areal density of 15 g/m2, tensile and flexural strengths increased by 33.96% and 34.39%, respectively, compared to the untoughened specimens. Additionally, model II IFT improved by 108.05%, reaching 9.05 KJ/m2, a significant enhancement over the untoughened specimens. Cross‐sectional fracture analysis revealed that the toughening mechanism involved fiber bridging, fiber pull‐out, fiber breakage, and fiber debonding of the SAFs within the resin‐rich layers. These processes effectively hinder crack propagation and absorb energy, contributing to the enhancements in toughness and mechanical strength. This study provides a comprehensive framework for interlaminar toughening using SAFs, addressing the critical challenge of delamination and paving the way for CFRP materials with enhanced performance and reliability in advanced engineering applications.Highlights: Effective CFRP interlayer toughening was achieved using wet veil‐formed SAFs. The model II IFT of CFRP was significantly increased by 108.05%. The tensile and flexural properties of CFRP were also enhanced.Keywords
Funding Information
- National Natural Science Foundation of China (52203084)
- Fundamental Research Funds for the Central Universities (3072024GH1001)
This publication has 23 references indexed in Scilit:
- Study on the properties of chitosan-modified epoxy resins and their compositesComposites Communications, 2024
- Improving interfacial and mechanical properties of epoxy resin composites by chemical grafting modification of poly‐ether‐ether‐ketone microparticles with carbon nanotubesPolymer Composites, 2024
- Advances in carbon fiber-based electromagnetic shielding materials: Composition, structure, and applicationCarbon, 2024
- Lightweight, hydrostatic pressure‐resistance, thermal insulating epoxy syntactic foam with a multiscale ternary structure for marine engineering applicationPolymer Composites, 2024
- Constructing ‘bayberry shape’ structure on HGMs surface using CNTs to enhance the mechanical properties of HGMs/epoxy compositesComposites Communications, 2024
- High‐velocity impact resistance of the carbon fiber composite grid sandwich structuresPolymer Composites, 2024
- Interlaminar fracture toughness of carbon/epoxy composites laminates toughened by short carbon fiberPolymer Composites, 2023
- Mode II interlaminar fracture toughness enhancement of fine z‐pin reinforced carbon fiber composite with low fraction of pinsPolymer Composites, 2022
- Short-aramid-fiber toughening of epoxy adhesive joint between carbon fiber composites and metal substrates with different surface morphologyComposites Part B: Engineering, 2015
- Carbon-fiber and aluminum-honeycomb sandwich composites with and without Kevlar-fiber interfacial tougheningComposites Part A: Applied Science and Manufacturing, 2014