Ultrahigh Step-Down Converter With Wide Input Voltage Range Based on Topology Exchange
- 14 September 2016
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 32 (7) , 5341-5364
Abstract
To overcome the traditional buck converter, which is difficult to achieve a high step-down gain with an appropriate duty cycle, a coupled-inductor-based step-down converter, named ultrahigh step-down converter, is proposed by Hwu et al.[11]. As compared with the buck converter, the ultrahigh step-down converter can achieve a much higher step-down gain, which can be determined by not only the duty cycle but also the turns ratio of the coupled inductor. However, the ultrahigh step-down converter is designed at a fixed input voltage of 48 V. In the telecommunication applications, the high dc bus voltage varies in a wide range, not kept at a fixed nominal voltage of 48 V. The experimental results show that as the input voltage increases, the efficiency of the ultrahigh step-down converter decreases. Therefore, in this paper, an improved ultrahigh step-down converter with a wide input voltage range is presented. According to the topology exchange, the voltage gain can be changed to a suitable one when the input voltage changes. By doing so, as compared with the ultrahigh step-down converter [11], the duty cycle of the proposed converter can be extended, and hence the efficiencies of the proposed converter can be improved. The proposed converter is verified by a wide input voltage (18-54 V), with an output voltage of 1.2 V and a rated output current of 10 A.Keywords
Funding Information
- Ministry of Science and Technology (MOST 103-2221-E-027-040-MY3)
This publication has 11 references indexed in Scilit:
- A High Step-Down Multiple Output Converter With Wide Input Voltage Range Based on Quasi Two-Stage Architecture and Dual-Output LLC Resonant ConverterIEEE Transactions on Power Electronics, 2014
- Ultrahigh Step-Down ConverterIEEE Transactions on Power Electronics, 2014
- Unified Synthesis of Tapped-Inductor DC-to-DC ConvertersIEEE Transactions on Power Electronics, 2013
- Improvement of One-comparator Counter-based PWM Control by Applying a Sawtoothed Wave Injection Method2007
- Applying a Counter-based PWM Control Scheme to an FPGA-based SR Forward Converter2006
- A review of distributed power systems part I: DC distributed power systemIEEE Aerospace and Electronic Systems Magazine, 2005
- A family of high power density bus converters2004
- Two-Stage Approach for 12-V VRIEEE Transactions on Power Electronics, 2004
- Power electronics building block and system integration2002
- Design considerations for 12-V/1.5-V, 50-A voltage regulator modulesIEEE Transactions on Power Electronics, 2001