Off-Set and Focus Effects on Grade 5 Titanium to 6061 Aluminum Alloy Fiber Laser Weld
Open Access
- 21 November 2018
- Vol. 11 (11) , 2337
Abstract
Joining dissimilar metal alloys together has become a major issue in the welding industry since the rapid development of innovative and performing multi-materials products. In case, titanium and Aluminum alloys can be laser-welded using a placement of the laser beam aside the weld centerline, which is called off-set. The fused zone is deep and narrow and the reaction between titanium and Aluminum is limited to a thin interlayer, which improves mechanical properties. In this paper, the effect of focus and off-set distance of the laser beam on the weldability of grade 5 titanium to 6061 Aluminum alloy dissimilar butt weld are presented. The interlayer thickness was correlated to the process parameters and tensile behavior of the weld. The map of deformation showed different deformations of the two weld sides. The data coming from the metallurgical and mechanical characterization of the weld were analyzed to figure out the best off-set and focus combination in the range studied.Keywords
This publication has 21 references indexed in Scilit:
- Microstructure characterization of laser welded Ti-6Al-4V fusion zonesMaterials Characterization, 2014
- Stabilization of a Laser Welding Process Against Focal Shift Effects using Beam ManipulationPhysics Procedia, 2013
- Interfacial microstructure and mechanical property of Ti6Al4V/A6061 dissimilar joint by direct laser brazing without filler metal and grooveMaterials Science and Engineering: A, 2013
- Study on the Joining of Titanium and Aluminum Dissimilar Alloys by Friction Stir WeldingThe Open Materials Science Journal, 2011
- Structure and properties of titanium-aluminum alloys doped with niobium and tantalumPowder Metallurgy and Metal Ceramics, 2011
- Improving interfacial reaction nonhomogeneity during laser welding–brazing aluminum to titaniumMaterials & Design (1980-2015), 2011
- Influence of interfacial reaction layer morphologies on crack initiation and propagation in Ti/Al joint by laser welding–brazingMaterials & Design (1980-2015), 2010
- Friction stir welding of titanium alloy TiAl6V4 to aluminium alloy AA2024-T3Materials Science and Engineering: A, 2009
- Laser welding of Ti6Al4V titanium alloysJournal of Materials Processing Technology, 2009
- Laser processing of aluminum–titanium-tailored blanksOptics and Lasers in Engineering, 2005