Effect of nitride-fiber on functional characteristics of polymer composites
- 24 December 2025
- journal article
- research article
- Published by Walter de Gruyter GmbH in Journal of Polymer Engineering
- Vol. 46 (2) , 114-124
Abstract
Polymer matrix composites are prospective for automotive component applications, such as roof frames, cabinets, and seat frames, due to their lightweight, better tensile, and compression strength behaviour. However, the mono-fibre-reinforced polymer matrix exhibited variations in mechanical behaviour due to poor interfacial bonding strength. In this research, nano-boron nitride (BN) particles are introduced during the fabrication of low-density polyethene (LDPE) composites with 15 wt% chopped hemp fibre (chemically treated hemp fibre, or chemically treated HF) through the hot compression moulding technique. Influences of nitride-fiber actions on microstructural and mechanical properties of the synthesized composite were investigated, and X-ray diffraction analysis confirms the crystalline peaks. From transmission electron microscopy analysis, nitride fibres are identified as being widely dispersed within the base LDPE matrix, resulting in enhanced mechanical properties of the composites. The LDPE/15 wt% HF/9 wt% BN composite exhibits a high tensile strength of 25 MPa, an impact toughness of 6.1 J/mm 2 , and a flexural strength of 28 MPa, with a notable enhancement in microhardness value (44 HV). Moreover, lightweight, improved moisture absorption (0.82 %), and higher onset degradation temperature of 356 °C (Higher thermal stability). This composite sample is proposed for automotive roof applications.Keywords
This publication has 26 references indexed in Scilit:
- Influences of basalt fiber position and addition on the mechanical and viscoelastic behaviors of steel mesh/flax/basalt fiber metal laminatesIranian Polymer Journal, 2024
- Investigation of nano-hBN/ natural fibers reinforced epoxy composites for thermal and electrical applications using GRA and ANFIS optimization methodsPolymer Testing, 2024
- Excellence of Nano SiC on Mechanical Behaviour of Low Density Polyethylene Hybrid NanocompositeJournal of The Institution of Engineers (India): Series D, 2024
- Synthesis and Functional Behavior of Sisal Fiber-Incorporated Epoxy Hybrid Nanocomposite Enriched by Nano-SiCJournal of The Institution of Engineers (India): Series D, 2024
- A Comparative Study on the Properties of Carbon Fiber-Reinforced Polymer Composites Developed by Hand Layup and Vacuum Bagging Molding TechniquesJournal of The Institution of Engineers (India): Series D, 2024
- Eggshell nanoparticle reinforced recycled low-density polyethylene: A new material for automobile applicationJournal of King Saud University – Engineering Sciences, 2023
- Synthesis and characterization study of Roselle fiber bonded polypropylene composite enriched by silica nanoparticles derived from bryophyllum pinnatum leaf wasteBiomass Conversion and Biorefinery, 2023
- Recycle of bio‐waste banana and sisal fiber filled harmlessness epoxy hybrid composite for automotive roof applicationEnvironmental Quality Management, 2023
- Effect of nanoparticles in natural fiber reinforced polymer compositesMaterials Today: Proceedings, 2023
- Modified hemp fiber combined with melamine cyanurate for enhancing fire safety and mechanical properties of unsaturated polyester resins for automobile partsAIP Advances, 2021