Rajendran Srinivasan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Rajendran Srinivasan has a total of 94 co-authors. Here are the top co-authors by number of shared publications:
- S. Sathiyamurthy
Department of Mechanical Engineering, Easwari Engineering College, Ramapuram, Chennai, India
8 shared publications - Ramya Maranan
Division of Research and Development, Lovely Professional University, Phagwara, India
5 shared publications Prahalad Singh Parihar
Department of Mechanical Engineering, IES College of Technology, Bhopal, India
4 shared publicationsRamya Maranan
Division of Research and Development , Lovely Professional University , Jalandhar – Delhi, G.T. Road , Phagwara 144411 , Punjab , India
4 shared publications- Ramya Maranan
Division of Research and Development, Lovely Professional University, Phagwara, India
4 shared publications Yogendra Thakur
Department of Mechanical Engineering , IES College of Technology , Bhopal 462044 , Madhya Pradesh , India
4 shared publications
Latest Publications
- 13 July 2026
- Published by Springer Nature in Applied Physics A
- Vol. 132 (8) , 728
Enrichment of specific capacitance and functional properties of Polytetrafluoroethylene composite work with CNT/graphene hybrids
- 13 July 2026
- Published by Springer Nature in Applied Physics A
- Vol. 132 (8) , 728
Enrichment of specific capacitance and functional properties of Polytetrafluoroethylene composite work with CNT/graphene hybrids
- 7 January 2026
- Published by Springer Nature in Silicon
- Vol. 18 (3-4) , 1231-1245
Contribution of Silicon Nitride and Ultrasonic Aided Stir Cast Processing on Functional Properties of Aluminium Alloy Composites
- 7 January 2026
- Published by Springer Nature in Silicon
- Vol. 18 (3-4) , 1231-1245
Contribution of Silicon Nitride and Ultrasonic Aided Stir Cast Processing on Functional Properties of Aluminium Alloy Composites
- 24 December 2025
- Published by Walter de Gruyter GmbH in Journal of Polymer Engineering
- Vol. 46 (2) , 114-124
Effect of nitride-fiber on functional characteristics of polymer composites
Polymer matrix composites are prospective for automotive component applications, such as roof frames, cabinets, and seat frames, due to their lightweight, better tensile, and compression strength behaviour. However, the mono-fibre-reinforced polymer matrix exhibited variations in mechanical behaviour due to poor interfacial bonding strength. In this research, nano-boron nitride (BN) particles are introduced during the fabrication of low-density polyethene (LDPE) composites with 15 wt% chopped hemp fibre (chemically treated hemp fibre, or chemically treated HF) through the hot compression moulding technique. Influences of nitride-fiber actions on microstructural and mechanical properties of the synthesized composite were investigated, and X-ray diffraction analysis confirms the crystalline peaks. From transmission electron microscopy analysis, nitride fibres are identified as being widely dispersed within the base LDPE matrix, resulting in enhanced mechanical properties of the composites. The LDPE/15 wt% HF/9 wt% BN composite exhibits a high tensile strength of 25 MPa, an impact toughness of 6.1 J/mm 2 , and a flexural strength of 28 MPa, with a notable enhancement in microhardness value (44 HV). Moreover, lightweight, improved moisture absorption (0.82 %), and higher onset degradation temperature of 356 °C (Higher thermal stability). This composite sample is proposed for automotive roof applications.
- 24 December 2025
- Published by Walter de Gruyter GmbH in Journal of Polymer Engineering
- Vol. 46 (2) , 114-124
Effect of nitride-fiber on functional characteristics of polymer composites
Polymer matrix composites are prospective for automotive component applications, such as roof frames, cabinets, and seat frames, due to their lightweight, better tensile, and compression strength behaviour. However, the mono-fibre-reinforced polymer matrix exhibited variations in mechanical behaviour due to poor interfacial bonding strength. In this research, nano-boron nitride (BN) particles are introduced during the fabrication of low-density polyethene (LDPE) composites with 15 wt% chopped hemp fibre (chemically treated hemp fibre, or chemically treated HF) through the hot compression moulding technique. Influences of nitride-fiber actions on microstructural and mechanical properties of the synthesized composite were investigated, and X-ray diffraction analysis confirms the crystalline peaks. From transmission electron microscopy analysis, nitride fibres are identified as being widely dispersed within the base LDPE matrix, resulting in enhanced mechanical properties of the composites. The LDPE/15 wt% HF/9 wt% BN composite exhibits a high tensile strength of 25 MPa, an impact toughness of 6.1 J/mm 2 , and a flexural strength of 28 MPa, with a notable enhancement in microhardness value (44 HV). Moreover, lightweight, improved moisture absorption (0.82 %), and higher onset degradation temperature of 356 °C (Higher thermal stability). This composite sample is proposed for automotive roof applications.
- 20 December 2025
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (20) , 19945-19954
Integration of Titanium Diboride and Electron Beam Melting Actions on Functional Properties of Aluminum Alloy Composites
- 20 December 2025
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (20) , 19945-19954
Integration of Titanium Diboride and Electron Beam Melting Actions on Functional Properties of Aluminum Alloy Composites
- 16 December 2025
- Published by Walter de Gruyter GmbH in Pure and Applied Chemistry
Surface morphological and optoelectrical characteristics of silicon nitride featured with magnesium oxide nano coating
The silicon nitride (Si 3 N 4 ) solar cell is well-known for its use in solar energy applications due to its passivation properties, which minimize surface recombination, improve thermal stability, and enhance chemical resistance. However, Si 3 N 4 is found to increase processing complexity due to uneven particle dispersion, and a higher concentration of Si 3 N 4 leads to microcracks in areas of high stress concentration, which limit the optoelectrical properties. This research aims to overcome processing difficulties and to enrich the functional characteristics of Si 3 N 4 solar cells with 20, 30, and 40 nm of magnesium oxide (MgO) nanocoating via a vacuum-assisted chemical vapour deposition (CVD) process. The effects of MgO and vacuum on the surface morphology during the CVD process were analyzed, revealing a fine-grain structure without microcracks, resulting in enhanced optoelectrical properties compared to those of the monolithic Si 3 N 4 solar cell. Likewise, X-ray diffraction analysis confirms the presence of MgO in Si 3 N 4 and its crystalline size. Furthermore, the Si 3 N 4 layer with 40 nm MgO is found to have an optimum drain current density of 2.8 × 10 −3 A, an improved photocurrent density of 2.6 mA/cm 2 , a reduced transmittance of 58 %, and a superior solar conversion efficiency of 24.1 %. It is suitable for thin-film solar cell applications.
- 16 December 2025
- Published by Walter de Gruyter GmbH in Pure and Applied Chemistry
Surface morphological and optoelectrical characteristics of silicon nitride featured with magnesium oxide nano coating
The silicon nitride (Si 3 N 4 ) solar cell is well-known for its use in solar energy applications due to its passivation properties, which minimize surface recombination, improve thermal stability, and enhance chemical resistance. However, Si 3 N 4 is found to increase processing complexity due to uneven particle dispersion, and a higher concentration of Si 3 N 4 leads to microcracks in areas of high stress concentration, which limit the optoelectrical properties. This research aims to overcome processing difficulties and to enrich the functional characteristics of Si 3 N 4 solar cells with 20, 30, and 40 nm of magnesium oxide (MgO) nanocoating via a vacuum-assisted chemical vapour deposition (CVD) process. The effects of MgO and vacuum on the surface morphology during the CVD process were analyzed, revealing a fine-grain structure without microcracks, resulting in enhanced optoelectrical properties compared to those of the monolithic Si 3 N 4 solar cell. Likewise, X-ray diffraction analysis confirms the presence of MgO in Si 3 N 4 and its crystalline size. Furthermore, the Si 3 N 4 layer with 40 nm MgO is found to have an optimum drain current density of 2.8 × 10 −3 A, an improved photocurrent density of 2.6 mA/cm 2 , a reduced transmittance of 58 %, and a superior solar conversion efficiency of 24.1 %. It is suitable for thin-film solar cell applications.
- 6 December 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (35) , 2231
Enhanced optoelectronic and mechanical properties of P3HT/ZnO nanowire hybrid films for bulk heterojunction solar cells
- 6 December 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (35) , 2231
Enhanced optoelectronic and mechanical properties of P3HT/ZnO nanowire hybrid films for bulk heterojunction solar cells