Novel Ultrasonic Flip Chip Bonding Approach Utilizing Electroplated Aluminium Pillars for Advanced Packaging
- 2 December 2025
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Abstract
Ultrasonic Flip-Chip bonding (US-FCB) is a potential integration method for narrow pitch ranges (less than $100 \mu \mathrm{m})$ [1], enabling the integration flexibility of individual chips into a package. A mono-metallic interconnect is more reliable and involves fewer fabrication process steps compared to solder reflow. The US-FCB was primarily investigated for metals such as gold (Au) and Copper (Cu) due to their material reliability, superior conductivity and technology availability [2]. However, both Au and Cu present integration challenges that often require additional metallization layers and elevated bonding temperatures [3], [4]. A new alternative approach is the use of aluminium (AI), offering mono-metallic interconnection at temperatures below $50{ }^{\circ} \mathrm{C}$ [5], [6]. The enabling technology for Al US-FCB is the electrochemical deposition (ECD) of Al from ionic liquids at the wafer level [6], [7]. Utilizing the same pillar fabrication method as for Cu or Au, the same benefits in geometric flexibility and thickness variation can be achieved. In comparison to Cu or Au, the use of Al as an interconnection material in US-FCB reduces the need for additional metallization layers on microelectronic contact pads.
Keywords
This publication has 21 references indexed in Scilit:
- Review of Cu–Cu direct bonding technology in advanced packagingNanotechnology, 2025
- No Flux Thermocompression Bonding: Adapting to the Future2025
- Influence of top-side metal layers on the performance of gold, silver, and copper wire bonds on aluminum padsMicroelectronics Reliability, 2025
- CMOS-Compatible Fine Pitch Al-Al Bonding2023
- Optimal design configuration for aluminum pillar fabrication towards fine pitch ultrasonic bonding applications2022
- Thermosonic direct Cu pillar bonding for 3D die stackingSN Applied Sciences, 2020
- Thermosonic vs thermocompression flip chip bonding for low cost system in packageAIP Conference Proceedings, 2018
- 3D Stacking Process with Thermo-Sonic Bonding Using Non-conductive Film2018
- A short review on thermosonic flip chip bondingAIP Conference Proceedings, 2017
- Copper Wire Bonding2014