Novel Expandable Epoxy Beads and Epoxy Particle Foam
Open Access
Abstract
Expanded polymeric beads offer the advantage of being able to produce parts with complex geometries through a consolidation process. However, established polymeric beads are made of thermoplastics, deform and melt beyond their temperature services. In this manuscript, a new technique is proposed to fabricate expandable epoxy beads (EEBs), then expand and fuse them to produce epoxy particle foams (EPFs). This technique is called solid-state carbamate foaming technique. For production of EEBs, a mixture of epoxy, carbamate and hardener is prepared and poured into a 10 mL syringe. The mixture is manually extruded into 60 °C water to obtain a cylindric shape. The extrudate is then further cured to obtain an epoxy oligomer behaving rheological tan delta 3 and 2 at 60 °C. The extrudate is cut into pellets to obtain EEBs. The EEBs are then loaded into an aluminum mold and placed in an oven at 160 °C to expand, fuse to obtain EPFs of 212 kg/m3 and 258 kg/m3. The obtained EPFs provide a Tg of 150–154 °C. The fusion boundaries in EPFs are well formed. Thus, the produced EPFs exhibit a compressive modulus of 50–70 MPa, with a torsion storage modulus at 30 °C of 34–56 MPa.Keywords
Funding Information
- German Research Foundation (DFG) (452210919, 437872031)
This publication has 22 references indexed in Scilit:
- Syntactic foams formulations, production techniques, and industry applications: a reviewJournal of Materials Research and Technology, 2020
- Improving the flame‐retardant property of bottle‐grade PET foam made by reactive foam extrusionJournal of Applied Polymer Science, 2020
- Effect of Resin and Blocked/Unblocked Hardener Mixture on the Production of Epoxy Foams with CO2 Blocked Hardener in Batch Foaming ProcessPolymers, 2019
- Preparation of Epoxy Composite Hollow Microspheres (ECHM) Using Toluenesulfonyl Hydrazide (TSH) as Blowing AgentMacromolecular Symposia, 2017
- High Temperature Epoxy Foam: Optimization of Process ParametersPolymers, 2016
- Glass transition temperature of polyurethane foams derived from lignin by controlled reaction rateJournal of Thermal Analysis and Calorimetry, 2013
- Porous epoxy microparticles prepared by an advanced aqueous methodMaterials Letters, 2011
- Indentation into polymeric foamsInternational Journal of Solids and Structures, 2010
- Production of novel epoxy micro-balloonsMaterials Letters, 2009
- Deformation mechanisms and energy absorption of polystyrene foams for protective helmetsPolymer Testing, 2002