Morphology and microwave absorption of carbon nanotube/bismaleimide foams
Authors:
- 9 December 2013
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 131 (9)
Abstract
Proper dispersion should be guaranteed when using carbon nanotubes (CNTs) as effective absorbents. Physical dispersion methods, such as mechanical mixing, ball milling, and calendering process (three‐roll milling), were adopted to disperse CNTs in the bismaleimide matrix to foam. The effects of the dispersion methods on viscosity, bubble morphology, and microwave‐absorbing properties at 12–18 GHz were studied. The results indicated that, three‐roll milling can more efficiently separate individual CNTs from the agglomerates compared with the other two methods. This method exhibited the highest viscosity, the most irregular cell shape, and the best microwave‐absorbing property. The effects of CNT concentration and foam thickness on the microwave‐absorbing properties were also studied. The reflectivity decreased and the position of the reflectivity peak moved to a lower value with increase in CNT concentration and foam thickness. The foam with 30 mm thickness achieved a reflection loss below −8 dB over 3.0 GHz in the range of 13.5–16.5 GHz. The minimum value is −14.2 dB at 14.6 GHz. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 40233.Keywords
This publication has 20 references indexed in Scilit:
- Effect of Prepolymerization Time on Morphology and Properties of Epoxy-modified Bismaleimide FoamsInternational Polymer Processing, 2012
- An experimental and theoretical investigation of the compressive properties of multi-walled carbon nanotube/poly(methyl methacrylate) nanocomposite foamsPolymer, 2011
- Electrical conductivity and major mechanical and thermal properties of carbon nanotube-filled polyurethane foamsJournal of Applied Polymer Science, 2011
- Enhanced electromagnetic characteristics of carbon nanotubes/carbonyl iron powders complex absorbers in 2–18GHz rangesJournal of Alloys and Compounds, 2011
- Investigation on electromagnetic and microwave absorbing properties of La0.7Sr0.3MnO3−δ/carbon nanotube compositesJournal of Applied Physics, 2010
- Synthesis and processing of PMMA carbon nanotube nanocomposite foamsPolymer, 2010
- Effect of short carbon fibers and MWCNTs on microwave absorbing properties of polyester composites containing nickel-coated carbon fibersComposites Science and Technology, 2010
- Microwave absorbing property and complex permittivity and permeability of epoxy composites containing Ni-coated and Ag filled carbon nanotubesComposites Science and Technology, 2008
- The electromagnetic characteristics and absorbing properties of multi-walled carbon nanotubes filled with Er2O3 nanoparticles as microwave absorbersMaterials Science and Engineering: B, 2008
- Electromagnetic and microwave absorbing properties of multi-walled carbon nanotubes filled with Ag nanowiresMaterials Science and Engineering: B, 2008