The Deployment of Carbon Monoxide Wireless Sensor Network (CO-WSN) for Ambient Air Monitoring
Open Access
- 16 June 2014
- journal article
- research article
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 11 (6) , 6246-6264
Abstract
Wireless sensor networks are becoming increasingly important as an alternative solution for environment monitoring because they can reduce cost and complexity. Also, they can improve reliability and data availability in places where traditional monitoring methods are difficult to site. In this study, a carbon monoxide wireless sensor network (CO-WSN) was developed to measure carbon monoxide concentrations at a major traffic intersection near the University of Cincinnati main campus. The system has been deployed over two weeks during Fall 2010, and Summer 2011–2012, traffic data was also recorded by using a manual traffic counter and a video camcorder to characterize vehicles at the intersection 24 h, particularly, during the morning and evening peak hour periods. According to the field test results, the 1 hr-average CO concentrations were found to range from 0.1–1.0 ppm which is lower than the National Ambient Air Quality Standards (NAAQS) 35 ppm on a one-hour averaging period. During rush hour periods, the traffic volume at the intersection varied from 2,067 to 3,076 vehicles per hour with 97% being passenger vehicles. Furthermore, the traffic volume based on a 1-h average showed good correlation (R2 = 0.87) with the 1-h average CO-WSN concentrations for morning and evening peak time periods whereas CO-WSN results provided a moderate correlation (R2 = 0.42) with 24 hours traffic volume due to fluctuated changes of meteorological conditions. It is concluded that the performance and the reliability of wireless ambient air monitoring networks can be used as an alternative method for real time air monitoring.Keywords
This publication has 13 references indexed in Scilit:
- Carbon Monoxide PoisoningJournal of Emergency Nursing, 2008
- Spectrum of an electron in a dielectric junctionPhysica Scripta, 2007
- Remote monitoring system with wireless sensors module for room environmentSensors and Actuators B: Chemical, 2006
- Personal exposure of street canyon intersection users to PM2.5, ultrafine particle counts and carbon monoxide in Central London, UKAtmospheric Environment, 2005
- Carbon monoxide levels measured in major commuting corridors covering different landuse and roadway microenvironments in Hong KongAtmospheric Environment, 2002
- Carbon monoxide poisoning — a public health perspectiveToxicology, 2000
- A solid polymer electrolyte-bases electrochemical carbon monoxide sensorSensors and Actuators B: Chemical, 1994
- A Planar Electrochemical Carbon Monoxide SensorJournal of the Electrochemical Society, 1992
- Planar microelectrochemical carbon monoxide sensorsSensors and Actuators B: Chemical, 1990
- A rapid method for surveying CO concentrations in high-rise buildingsEnvironment International, 1986