Analytical Design of Self-Sensing Control for PMSM Using Quasi-Direct Calculation
Open Access
- 16 May 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Industry Applications
- Vol. 4, 149-159
Abstract
The analytical description and parameterisation of a self-sensing control (SSC) for an electrical machine is an important step towards easier commissioning of these systems. In this paper, the advantages of high bandwidth position estimation via numerical optimisation and the filtering characteristics of a phase-locked loop (PLL) are combined in the quasi-direct (QD) calculation. The QD calculation uses two parameters for estimation. With the help of the maximum possible acceleration of the drive train, an interdependency between these two parameters is derived. The remaining degree of freedom is used to tune the dynamics of the estimation. Using the transfer function of the estimator, which is derived analytically, the parameters of the speed control are selected, and a specified phase-margin is implemented. With the help of the analytical parameterisation, no empirical or numerical tuning needs to be done, which is unique for SSC. All results are experimentally validated.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (424944120)
- Open Access Fund of the Leibniz Universität Hannover
This publication has 17 references indexed in Scilit:
- A Family of Adaptive Position Estimators for PMSM Using the Gradient Descent MethodIEEE Journal of Emerging and Selected Topics in Power Electronics, 2021
- Numerical Methods and Optimization2021
- Iterative Tracker for Anisotropy-Based Self-Sensing Control of PMSM2019
- Reduced observer for anisotropy-based position estimation of PM synchronous machines using current oversampling2017
- Compensation of switching dead-time effects in voltage-fed PWM inverters using FPGA-based current oversampling2016
- Silent injection for saliency based sensorless control by means of current oversampling2013
- Sensorless Drives in Industrial ApplicationsIEEE Industrial Electronics Magazine, 2011
- Sensorless position control of permanent magnet synchronous machines without limitation at zero speed2003
- Control of Electrical Drives2001
- Rotor position and velocity estimation for a salient-pole permanent magnet synchronous machine at standstill and high speedsIEEE Transactions on Industry Applications, 1998