Medium-High-Frequency and High Sensitivity Fiber Optic Acceleration Sensor Based on F–P Interference
- 3 October 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (22) , 36751-36760
Abstract
high sensitivity fiber-optic acceleration sensor based on a Fabry-Perot Interferometer (FPI) formed by an aluminum alloy elastic mass-block structure is proposed for measuring acceleration signals in a vibrating environment. The sensing structure mainly consists of a single-mode optical fiber collimated reflector 1, reflector 2 and a mass block elastic structure, where the optical fiber collimated reflector 1 and the reflector 2 located on the upper surface of the elastic mass block form an F-P interferometric cavity. According to the F-P interferometric sensing principle, the reflectivity of the two end faces and the cavity length parameters are simulated and optimized to produce an acceleration sensor with a highly finesse reflectance spectrum (extremely narrow spectral trough). The mass block dimensions of the sensing structure were simulated and optimized and performance analyzed using finite element software, and the sensor was fabricated according to the analysis results, and the amplitude-frequency response, sensitivity characteristics and lateral anti-interference capability of the sensor were investigated experimentally. The experimental results show that the sensor has an intrinsic frequency of 2100 Hz, a sensitivity of 4.91 nm/g at 1300 Hz, a resolution of 0.204 mg, and a transverse immunity of less than 5% within the operating bandwidth of 0-1300 Hz. The sensor proposed in this paper is characterized by high sensitivity, a large operating bandwidth range, and low lateral interference, making it suitable for monitoring medium and high-frequency vibration signals in aerospace and other equipment structures.Keywords
Funding Information
- Research Project of Beijing Municipal Natural Science Foundation (BJXZ2021-012-00046)
This publication has 21 references indexed in Scilit:
- High-Sensitivity Fiber-Optic Fabry–Perot Acceleration Sensor Based on a Cascaded-Curved Beams StructureIEEE Sensors Journal, 2023
- Medium and low frequency fiber Bragg grating acceleration sensor based on single-sided single-arc hingeOptical Fiber Technology, 2022
- Broadband and High Sensitivity FBG Accelerometer Based on Double Diaphragms and h-Shaped HingesIEEE Sensors Journal, 2020
- An in-fiber Acceleration Sensor based on Fabry–Perot Cavity2019
- Design and Modeling of a High Sensitivity Fiber Bragg Grating-Based AccelerometerIEEE Sensors Journal, 2019
- Low weight additive manufacturing FBG accelerometer: Design, characterization and testingMeasurement, 2018
- Fault detection of a wheelset bearing in a high-speed train using the shock-response convolutional sparse-coding techniqueMeasurement, 2018
- A Fiber-Optic Fabry-Perot Accelerometer Based on High-Speed White Light Interferometry DemodulationJournal of Lightwave Technology, 2017
- A diaphragm type fiber Bragg grating vibration sensor based on transverse property of optical fiber with temperature compensationIEEE Sensors Journal, 2016
- Loop topology based white light interferometric fiber optic sensor network for application of perimeter securityPhotonic Sensors, 2010