Diffractive Optical Elements with a Large Angle of Operation Recorded in Acrylamide Based Photopolymer on Flexible Substrates
Open Access
- 11 December 2014
- journal article
- research article
- Published by Wiley in International Journal of Polymer Science
- Vol. 2014, 1-7
Abstract
A holographic device characterised by a large angular range of operation is under development. The aim of this study is to increase the angular working range of the diffractive lens by stacking three layers of high efficiency optical elements on top of each other so that light is collected (and focussed) from a broader range of angles. The angular range of each individual lens element is important, and work has already been done in an acrylamide-based photosensitive polymer to broaden the angular range of individual elements using holographic recording at a low spatial frequency. This paper reports new results on the angular selectivity of stacked diffractive lenses. A working range of 12° is achieved. The diffractive focussing elements were recorded holographically with a central spatial frequency of 300 l/mm using exposure energy of 60 mJ/cm2at a range of recording angles. At this spatial frequency with layers of thickness 50 ± 5 µm, a diffraction efficiency of 80% and 50% was achieved in the single lens element and combined device, respectively. The optical recording process and the properties of the multilayer structure are described and discussed. Holographic recording of a single lens element is also successfully demonstrated on a flexible glass substrate (Corning(R) Willow(R) Glass) for the first time.Keywords
Funding Information
- Dublin Institute of Technology
This publication has 21 references indexed in Scilit:
- Two-wavelength holographic recording in thick phenanthrenequinone-doped poly(methyl methacrylate) photopolymerOptical Engineering, 2012
- Two-way diffusion model for short-exposure holographic grating formation in acrylamide-based photopolymerJournal of the Optical Society of America B, 2010
- Characterisation of the humidity and temperature responses of a reflection hologram recorded in acrylamide-based photopolymerSensors and Actuators B: Chemical, 2009
- Organic nanoparticle (hyperbranched polymer)-dispersed photopolymers for volume holographic storageApplied Physics Letters, 2006
- Characterization of an acrylamide-based photopolymer for data storage utilizing holographic angular multiplexingJournal of Optics A: Pure and Applied Optics, 2005
- Edge-enhanced imaging with polyvinyl alcohol /acrylamide photopolymer gratingsOptics Letters, 2003
- Optimization of two-monomer-based photopolymer used for holographic recordingMaterials Letters, 2002
- Copying low spatial frequency diffraction gratings in photopolymer as phase hologramsJournal of Modern Optics, 2000
- High-density recording in photopolymer-based holographic three-dimensional disksApplied Optics, 1996
- Characterization of an acrylamide-based dry photopolymer holographic recording materialOptical Engineering, 1994