Anisotropic Plasticity and Fracture of Three 6000-Series Aluminum Alloys
Open Access
Abstract
The influence of microstructure on plasticity and fracture of three 6000-series aluminum alloys is studied with emphasis on the anisotropy caused by the extrusion process. Tension tests on smooth and notched specimens are performed in different directions with respect to the extrusion direction, where the stress and strain to fracture are based on local measurements inside the neck or notch. The microstructure of the alloys, i.e., grain structure, crystallographic texture and size distribution of constituent particles, is characterized and used to explain the experimental findings. The experiments show considerable differences in the directional variation of the yield stress, the plastic flow, the work hardening, and the failure strain between alloys exhibiting recrystallization texture and deformation texture. The alloys with recrystallized microstructure exhibited substantial anisotropic work hardening caused by texture evolution and a stronger notch sensitivity of the failure strain than the alloy with deformed, non-recrystallized microstructure. Comparisons are made with previous experiments on the same alloys in the cast and homogenized condition, and the effects of the microstructural changes caused by the extrusion process on the macroscopic response are discussed.Keywords
Funding Information
- Norges Forskningsråd (250553)
This publication has 42 references indexed in Scilit:
- On the plastic anisotropy of an aluminium alloy and its influence on constrained multiaxial flowInternational Journal of Plasticity, 2011
- Damage quantification in aluminium alloys using in situ tensile tests in X-ray tomographyEngineering Fracture Mechanics, 2011
- An experimental study on the dynamic fracture of extruded AA6xxx and AA7xxx aluminium alloysMaterials Science and Engineering: A, 2009
- Behaviour of extruded aluminium alloys under proportional and non-proportional strain pathsJournal of Materials Processing Technology, 2009
- Anisotropic ductile fracture of Al 2024 alloysEngineering Fracture Mechanics, 2008
- Anisotropic yield function of hexagonal materials taking into account texture development and anisotropic hardeningActa Materialia, 2006
- Anisotropic ductile fractureActa Materialia, 2004
- Flow and fracture characteristics of aluminium alloy AA5083–H116 as function of strain rate, temperature and triaxialityMaterials Science and Engineering: A, 2004
- Plastic flow for non-monotonic loading conditions of an aluminum alloy sheet sampleInternational Journal of Plasticity, 2003
- Void coalescence within periodic clusters of particlesJournal of the Mechanics and Physics of Solids, 2003