An Ultrasonic Vibration Scratch Tester for Studying the Scratch Characteristics of Materials under Ultrasonic Vibration Contact Status
Open Access
Abstract
Ultrasonic vibration-assisted machining is a promising technique for improving the removability of materials, especially for difficult-to-machine materials, but the material removal mechanism under ultrasonic vibration status is still far from clear. Scratch testing is generally employed to study the material removal mechanism, but currently, there is a lack of instruments capable of performing scratch testing under ultrasonic vibration. To address this gap, this study developed an ultrasonic vibration scratch tester that can perform quantitative ultrasonic vibration-assisted scratch (UVAS) testing of materials. A prototype was designed and fabricated, followed by characterizing its performance parameters. Comparative experiments of conventional scratch (CS) testing and UVAS testing were performed on AL1050 to investigate the effects of ultrasonic vibration on scratch characteristics, such as the scratch depth and coefficient of friction. It was found that compared to CS testing, UVAS testing, with an amplitude of 1.45 µm and a frequency of 20 kHz, achieved a maximum reduction in the coefficient of friction of approximately 22.5% and a maximum increase in the depth of the residual scratch of approximately 175%. These findings confirm the superiority of ultrasonic vibration-assisted machining and demonstrate the requirement for the development of ultrasonic vibration scratch testers.Keywords
Funding Information
- Jilin Provincial Key Research and Development Plan Project (20240302066GX, 52075221, 2023-JCXK-02)
- National Natural Science Foundation of China (20240302066GX, 52075221, 2023-JCXK-02)
- Fundamental Research Funds for the Central Universities (20240302066GX, 52075221, 2023-JCXK-02)
This publication has 30 references indexed in Scilit:
- Developing a novel radial ultrasonic vibration-assisted grinding device and evaluating its performance in machining PTMCsChinese Journal of Aeronautics, 2023
- Research on the formation mechanism of surface morphology in three-excitation ultrasonic spatial vibration-assisted turningThe International Journal of Advanced Manufacturing Technology, 2022
- Research on modeling of grinding force in ultrasonic vibration–assisted grinding of 304 stainless steel materialsThe International Journal of Advanced Manufacturing Technology, 2022
- Anisotropy dependence of material removal and deformation mechanisms during nanoscratch of gallium nitride single crystals on (0001) planeApplied Surface Science, 2022
- Sustainable drilling process of 1045 steel plates regarding minimum energy consumption and desired work qualityInternational Journal of Lightweight Materials and Manufacture, 2019
- Examination of the Material Removal of unreinforced, thermoplastic Polymers by Scratch TestsProduction Engineering, 2019
- Analysis of material removal behavior in ultrasonically assisted scratching of RB-SiC from energy aspectsThe International Journal of Advanced Manufacturing Technology, 2018
- Effects of Ultrasonics-Assisted Face Milling on Surface Integrity and Fatigue Life of Ni-Alloy 718Journal of Materials Engineering and Performance, 2016
- Development of a novel ultrasonic unit for grinding of ceramic matrix compositesThe International Journal of Advanced Manufacturing Technology, 2011
- Effect of machining parameters in ultrasonic vibration cuttingInternational Journal of Machine Tools and Manufacture, 2008