Haoxiang Wu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Haoxiang Wu has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Hu Huang
Jilin University
12 shared publications - Hongwei Zhao
Jilin University
4 shared publications - Xuan Li
Key Laboratory of CNC Equipment Reliability, Ministry of Education, School of Mechanical and Aerospace Engineering, Jilin University, Changchun, Jilin, China
3 shared publications - Zhi Xu
Key Laboratory of CNC Equipment Reliability, Ministry of Education, School of Mechanical and Aerospace Engineering, Jilin University, Changchun, Jilin, China
3 shared publications Chao Wang
2 shared publicationsGuihao He
2 shared publications
Latest Publications
- 27 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 1-15
An In Situ Laser-Assisted Micro/Nano Scratch Tester for Characterizing the Deformation Behaviors of Materials at High Temperature
Laser-assisted machining technology is widely used in the field of ultra-precision manufacturing. However, the microscale deformation mechanisms of materials under the action of mechanical-thermal coupling remain unclear, and there is a lack of specialized tester to carry out laser-assisted scratch tests with the quantitative normal force. To this end, an in-situ laser-assisted micro/nano scratch tester was developed here, featuring a normal force control uncertainty of 1.6%, and the control logic based on optical-mechanical coupling was planned. The in-situ laser heating strategy maximized the upper temperature limit of the scratch region. Considering the power attenuation of the laser as it passed through the indenter, the temperature field of in-situ laser heating on Zr-based metallic glass (MG) was modeled. And a multi-point temperature synchronous acquisition method based on the thermocouple array was proposed, which accurately measured the spatial and temporal distribution characteristics of the temperature field and realized the calibration of the temperature field model with an uncertainty of 0.6%. Utilizing the developed tester, the scratch-induced deformation behaviors of Zr-based MG at high temperature were investigated. As the laser power increased from 0 W to 10.5 W, the temperature of Zr-based MG entered the supercooled liquid phase region. The average depth of residual scratch grooves increased from 0.45 μm to 5.56 μm, the average width expanded from 4.92 μm to 72.11 μm, and the average COF rose from 0.194 to 0.412. Correspondingly, the dominant scratch-induced deformation mechanism evolved from ploughing to cutting. This study provides an instrument to investigate the microscale deformation behaviors and removal mechanisms of materials in laser-assisted machining.
- 27 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 1-15
An In Situ Laser-Assisted Micro/Nano Scratch Tester for Characterizing the Deformation Behaviors of Materials at High Temperature
Laser-assisted machining technology is widely used in the field of ultra-precision manufacturing. However, the microscale deformation mechanisms of materials under the action of mechanical-thermal coupling remain unclear, and there is a lack of specialized tester to carry out laser-assisted scratch tests with the quantitative normal force. To this end, an in-situ laser-assisted micro/nano scratch tester was developed here, featuring a normal force control uncertainty of 1.6%, and the control logic based on optical-mechanical coupling was planned. The in-situ laser heating strategy maximized the upper temperature limit of the scratch region. Considering the power attenuation of the laser as it passed through the indenter, the temperature field of in-situ laser heating on Zr-based metallic glass (MG) was modeled. And a multi-point temperature synchronous acquisition method based on the thermocouple array was proposed, which accurately measured the spatial and temporal distribution characteristics of the temperature field and realized the calibration of the temperature field model with an uncertainty of 0.6%. Utilizing the developed tester, the scratch-induced deformation behaviors of Zr-based MG at high temperature were investigated. As the laser power increased from 0 W to 10.5 W, the temperature of Zr-based MG entered the supercooled liquid phase region. The average depth of residual scratch grooves increased from 0.45 μm to 5.56 μm, the average width expanded from 4.92 μm to 72.11 μm, and the average COF rose from 0.194 to 0.412. Correspondingly, the dominant scratch-induced deformation mechanism evolved from ploughing to cutting. This study provides an instrument to investigate the microscale deformation behaviors and removal mechanisms of materials in laser-assisted machining.
- 3 January 2026
- Published by Elsevier in Tribology International
- Vol. 217
Understanding the micro-deformation behavior of the FeCoCrMnNi high-entropy alloy during vibration-assisted scratching
- 3 January 2026
- Published by Elsevier in Tribology International
- Vol. 217
Understanding the micro-deformation behavior of the FeCoCrMnNi high-entropy alloy during vibration-assisted scratching
- 30 September 2025
- Published by Elsevier in Tribology International
- Vol. 214
Effects of cold rolling and annealing on the micro-deformation behavior of the FeCoCrMnNi high entropy alloy under scratching
- 30 September 2025
- Published by Elsevier in Tribology International
- Vol. 214
Effects of cold rolling and annealing on the micro-deformation behavior of the FeCoCrMnNi high entropy alloy under scratching
- Top Cited PapersOpen Access
- 6 February 2025
- Published by IOP Publishing in International Journal of Extreme Manufacturing
- Vol. 7 (3) , 035102
Micro-amplitude vibration-assisted scratching: a new method for one step and controllable fabrication of the microscale V-groove and nanoscale ripples
Micro/nano hierarchical structures could endow materials with various surface functions. However, the multilayer and multiscale characteristics of micro/nano hierarchical structures bring difficulties for their one step and controllable fabrication. Accordingly, based on tip-based fabrication techniques, this study proposed a micro-amplitude vibration-assisted scratching method by introducing a periodic backward displacement into the conventional scratching process, which enabled the synchronous creation of the microscale V-groove and nanoscale ripples, i.e. a typical micro/nano hierarchical structure. The experiments and finite element modeling were employed to explore the formation process and mechanism of the micro/nano hierarchical structures. Being different from conventional cutting, this method was mainly based on the plow mechanism, and it could accurately replicate the shape of the indenter on the material surface. The microscale V-groove was formed due to the scratching action, and the nanoscale ripple was formed due to the extrusion action of the indenter on the microscale V-groove’s surface. Furthermore, the relationships between the processing parameters and the dimensions of the micro/nano hierarchical structures were established through experiments, and optimized processing parameters were determined to achieve regular micro/nano hierarchical structures. By this method, complex patterns constructed by various micro/nano hierarchical structures were fabricated on both flat and curved surfaces, achieving diverse surface structural colors.
- 6 February 2025
- Published by IOP Publishing in International Journal of Extreme Manufacturing
- Vol. 7 (3) , 035102
Top Cited PapersOpen AccessMicro-amplitude vibration-assisted scratching: a new method for one step and controllable fabrication of the microscale V-groove and nanoscale ripples
Micro/nano hierarchical structures could endow materials with various surface functions. However, the multilayer and multiscale characteristics of micro/nano hierarchical structures bring difficulties for their one step and controllable fabrication. Accordingly, based on tip-based fabrication techniques, this study proposed a micro-amplitude vibration-assisted scratching method by introducing a periodic backward displacement into the conventional scratching process, which enabled the synchronous creation of the microscale V-groove and nanoscale ripples, i.e. a typical micro/nano hierarchical structure. The experiments and finite element modeling were employed to explore the formation process and mechanism of the micro/nano hierarchical structures. Being different from conventional cutting, this method was mainly based on the plow mechanism, and it could accurately replicate the shape of the indenter on the material surface. The microscale V-groove was formed due to the scratching action, and the nanoscale ripple was formed due to the extrusion action of the indenter on the microscale V-groove’s surface. Furthermore, the relationships between the processing parameters and the dimensions of the micro/nano hierarchical structures were established through experiments, and optimized processing parameters were determined to achieve regular micro/nano hierarchical structures. By this method, complex patterns constructed by various micro/nano hierarchical structures were fabricated on both flat and curved surfaces, achieving diverse surface structural colors.
- 27 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. 21 (4) , 3428-3437
Compliant Mechanism Adaptive Suppression of the Force Fluctuation in Motor-Driven Scratch Testers
Scratch testing is an effective technique for evaluating surface mechanical properties of materials. However, for motor-driven scratch testers, the micron-scale axial transmission clearance of ball screws and the millisecond response time of the motor greatly affect the compensation of the normal force, leading to a large fluctuation of the normal force. Accordingly, this study proposed a compliant mechanism adaptive suppression method to adapt to the change in geometric characteristics and mechanical properties of a sample surface, thereby reducing the fluctuation of the normal force. The structural characteristics of the compliant mechanism were discussed, followed by theoretical and simulation analysis to demonstrate the effectiveness of the method. Comparative experiments were performed on materials with heterogeneous mechanical properties and rough surfaces by scratch testers with and without the compliant mechanism. The results confirmed that the proposed method could well suppress the fluctuation of the normal force in motor-driven scratch testers under various experimental conditions.
- 27 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Informatics
- Vol. 21 (4) , 3428-3437
Compliant Mechanism Adaptive Suppression of the Force Fluctuation in Motor-Driven Scratch Testers
Scratch testing is an effective technique for evaluating surface mechanical properties of materials. However, for motor-driven scratch testers, the micron-scale axial transmission clearance of ball screws and the millisecond response time of the motor greatly affect the compensation of the normal force, leading to a large fluctuation of the normal force. Accordingly, this study proposed a compliant mechanism adaptive suppression method to adapt to the change in geometric characteristics and mechanical properties of a sample surface, thereby reducing the fluctuation of the normal force. The structural characteristics of the compliant mechanism were discussed, followed by theoretical and simulation analysis to demonstrate the effectiveness of the method. Comparative experiments were performed on materials with heterogeneous mechanical properties and rough surfaces by scratch testers with and without the compliant mechanism. The results confirmed that the proposed method could well suppress the fluctuation of the normal force in motor-driven scratch testers under various experimental conditions.
- Open Access
- 18 July 2024
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 31, 3825-3843
Direct observation of the fracture process on C-plane sapphire by in-situ scratch tests
- 18 July 2024
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 31, 3825-3843
Open AccessDirect observation of the fracture process on C-plane sapphire by in-situ scratch tests
- Open Access
An Ultrasonic Vibration Scratch Tester for Studying the Scratch Characteristics of Materials under Ultrasonic Vibration Contact Status
Ultrasonic vibration-assisted machining is a promising technique for improving the removability of materials, especially for difficult-to-machine materials, but the material removal mechanism under ultrasonic vibration status is still far from clear. Scratch testing is generally employed to study the material removal mechanism, but currently, there is a lack of instruments capable of performing scratch testing under ultrasonic vibration. To address this gap, this study developed an ultrasonic vibration scratch tester that can perform quantitative ultrasonic vibration-assisted scratch (UVAS) testing of materials. A prototype was designed and fabricated, followed by characterizing its performance parameters. Comparative experiments of conventional scratch (CS) testing and UVAS testing were performed on AL1050 to investigate the effects of ultrasonic vibration on scratch characteristics, such as the scratch depth and coefficient of friction. It was found that compared to CS testing, UVAS testing, with an amplitude of 1.45 µm and a frequency of 20 kHz, achieved a maximum reduction in the coefficient of friction of approximately 22.5% and a maximum increase in the depth of the residual scratch of approximately 175%. These findings confirm the superiority of ultrasonic vibration-assisted machining and demonstrate the requirement for the development of ultrasonic vibration scratch testers.
Open AccessAn Ultrasonic Vibration Scratch Tester for Studying the Scratch Characteristics of Materials under Ultrasonic Vibration Contact Status
Ultrasonic vibration-assisted machining is a promising technique for improving the removability of materials, especially for difficult-to-machine materials, but the material removal mechanism under ultrasonic vibration status is still far from clear. Scratch testing is generally employed to study the material removal mechanism, but currently, there is a lack of instruments capable of performing scratch testing under ultrasonic vibration. To address this gap, this study developed an ultrasonic vibration scratch tester that can perform quantitative ultrasonic vibration-assisted scratch (UVAS) testing of materials. A prototype was designed and fabricated, followed by characterizing its performance parameters. Comparative experiments of conventional scratch (CS) testing and UVAS testing were performed on AL1050 to investigate the effects of ultrasonic vibration on scratch characteristics, such as the scratch depth and coefficient of friction. It was found that compared to CS testing, UVAS testing, with an amplitude of 1.45 µm and a frequency of 20 kHz, achieved a maximum reduction in the coefficient of friction of approximately 22.5% and a maximum increase in the depth of the residual scratch of approximately 175%. These findings confirm the superiority of ultrasonic vibration-assisted machining and demonstrate the requirement for the development of ultrasonic vibration scratch testers.
- 8 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (11) , 15190-15199
Development of a Vibration-Assisted Micro/Nano Scratch Tester for Evaluating the Scratch Behaviors of Materials Under Vibration Environment
Micro/nano scratch testing is an effective technique for characterizing the mechanical properties and wear resistance of materials. In practical applications, most of the materials in equipment serve in a vibration environment. However, the scratching characteristics of materials under vibration environment have not been well investigated due to the lack of suitable testing instruments. To address this issue, in this article, we develop a vibration-assisted micro/nano scratch tester. Its working principle is introduced, followed by designing and analyzing the vibration platform. Then, the prototype is fabricated and a control system is established. After that, the key performance parameters of the tester are characterized. The results showed that the load noise is lower than 0.1 mN, and the vibration platform can generate a unidirectional vibration with the amplitude range of 0.2–11 μm and frequency range of 1–2000 Hz. To verify the feasibility of the proposed scratch tester, vibration-assisted scratch tests are performed on AL1050. It is shown that vibration during scratch testing leads to an increase in the residual scratch width and a decrease in the coefficient of friction and scratch hardness. These findings verify the effectiveness of the vibration-assisted micro/nano scratch tester and highlight the significance of considering vibration effects on the characterization of materials.
- 8 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (11) , 15190-15199
Development of a Vibration-Assisted Micro/Nano Scratch Tester for Evaluating the Scratch Behaviors of Materials Under Vibration Environment
Micro/nano scratch testing is an effective technique for characterizing the mechanical properties and wear resistance of materials. In practical applications, most of the materials in equipment serve in a vibration environment. However, the scratching characteristics of materials under vibration environment have not been well investigated due to the lack of suitable testing instruments. To address this issue, in this article, we develop a vibration-assisted micro/nano scratch tester. Its working principle is introduced, followed by designing and analyzing the vibration platform. Then, the prototype is fabricated and a control system is established. After that, the key performance parameters of the tester are characterized. The results showed that the load noise is lower than 0.1 mN, and the vibration platform can generate a unidirectional vibration with the amplitude range of 0.2–11 μm and frequency range of 1–2000 Hz. To verify the feasibility of the proposed scratch tester, vibration-assisted scratch tests are performed on AL1050. It is shown that vibration during scratch testing leads to an increase in the residual scratch width and a decrease in the coefficient of friction and scratch hardness. These findings verify the effectiveness of the vibration-assisted micro/nano scratch tester and highlight the significance of considering vibration effects on the characterization of materials.