Impact of TaOx nanolayer at the GeSex/W interface on resistive switching memory performance and investigation of Cu nanofilament
Open Access
- 15 March 2012
- journal article
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 111 (6) , 063710
Abstract
The impact of a TaOx nanolayer at the GeSex/W interface on the performance of resistive switching memory in an Al/Cu/GeSex/TaOx/W structure has been examined. All materials and the memory structure have been investigated using high-resolution transmission electron microscopy, energy dispersive x ray spectroscopy, and x ray photo-electron spectroscopy analyses. A conically shaped crystalline Cu (111) nanofilament with a diameter of around 17 nm in the TaOx nanolayer after a current compliance (CC) of 500 μA has been observed, and this has been also characterized by fast Fourier transform. The low resistance state (LRS) decreases as the current compliances (CCs) increased from 1 nA to 1 mA, since the nanofilament diameter increased from 0.04 to 23.4 nm. This is also estimated by bipolar resistive switching characteristics. The resistivity of this crystalline Cu nanofilament is approximately 2300 μΩ.cm. The nanofilament has a cylindrical shape, with CCs ranging from 1 nA to 10 μA and a conical shape with CCs ranging from 50 μA-1 mA. The resistive switching mechanism has been explained successfully under SET and RESET operations. Improved resistive switching parameters, such as SET voltage, LRS, and high resistance state with consecutive switching cycles are obtained and compared to those of pure GeSex and TaOx materials. Extrapolated, long program/erase endurance of > 106 cycles, attributed to the Al/Cu/GeSex/TaOx/W structure design, is observed. This resistive switching memory structure shows extrapolated 10 years data retention with a resistance ratio of > 10 at a low CC of 0.1 μA at 50 °C. A large memory size of ∼ 6 Pbit/sq. in. is obtained, considering the nanofilament diameter at a low CC of 0.1 μA. This study is important not only for improving the performance of low-power resistive switching memory, but also helpful for designing other nonvolatile memory devices.Keywords
This publication has 43 references indexed in Scilit:
- A HfO2 Thin Film Resistive Switch Based on Conducting Atomic Force MicroscopyElectrochemical and Solid-State Letters, 2011
- Controllable Growth of Nanoscale Conductive Filaments in Solid-Electrolyte-Based ReRAM by Using a Metal Nanocrystal Covered Bottom ElectrodeACS Nano, 2010
- Formation and Instability of Silver Nanofilament in Ag-Based Programmable Metallization CellsACS Nano, 2010
- Resistive switching mechanism in delafossite-transition metal oxide (CuInO2–CuO) bilayer structureJournal of Applied Physics, 2010
- Excellent Switching Uniformity of Cu-Doped $\hbox{MoO}_{x}/\hbox{GdO}_{x}$ Bilayer for Nonvolatile Memory ApplicationsIEEE Electron Device Letters, 2009
- Memristive switching mechanism for metal/oxide/metal nanodevicesNature Nanotechnology, 2008
- Controlled local filament growth and dissolution in Ag–Ge–SePhysica Status Solidi (RRL) – Rapid Research Letters, 2008
- Modified resistive switching behavior of ZrO2 memory films based on the interface layer formed by using Ti top electrodeJournal of Applied Physics, 2007
- X-Ray Photoelectron Spectroscopy of Ag- and Cu-Doped Amorphous As2Se3 and GeSe2Japanese Journal of Applied Physics, 1982
- Optical Properties of Amorphous SeleniumPhysical Review Letters, 1970