Abstract
Droplet impingement on rotating blades is a critical mechanism in the onset of in-flight icing, yet the combined effects of wind speed and blade pitch angle on impact characteristics remain insufficiently quantified under controlled conditions. This study characterizes water droplet impact on a two-blade propeller assembly rotating at a fixed speed of 3760~rpm using water-sensitive paper (WSP) as the detection medium. Three wind speeds (6~m~s$^{-1}$, 8~m~s$^{-1}$ and 10~m~s$^{-1}$) and four pitch angles (6$^{\circ}$, 12$^{\circ}$, 18$^{\circ}$ and 24$^{\circ}$) were tested in a factorial design with three independent replicates per condition, yielding 67 valid observations. Droplet density and the median volume diameter (MVD) were extracted from high-resolution WSP scans through automated image analysis. Statistical analysis showed that pitch angle was the dominant factor controlling impact density ($H=34.37$, $p<0.001$, $\varepsilon^2\approx0.50$), whereas wind speed produced a smaller but statistically significant effect ($H=8.63$, $p=0.013$, $\varepsilon^2\approx0.10$). The response exhibited a positive interaction between wind speed and pitch angle, with the sensitivity to freestream velocity increasing at higher pitch angles. The highest measured impact density was $489.9\pm88.2$ drops/cm$^2$ at $10$ m/s and $24^\circ$. An exploratory power-law analysis of the twelve condition means yielded $\rho_d\approx0.0204V_{\infty}^{2.14}\beta^{1.63}$ with $R^2\approx0.966$. MVD showed substantially weaker dependence on the experimental factors and remained within approximately $139$--$153~\mu$m when grouped by wind speed. The results demonstrate that pitch angle primarily controls droplet loading, while wind speed amplifies this loading at high pitch angles.