Study on the Onset of Significant Void in Subcooled Boiling in Narrow Rectangular Channels Based on Bubble Coalescence
Authors:
- Di ZhuDZDi Zhu
- Rulei SunRSRulei Sun
- Chi YaoCYChi Yao
- Shixuan WangSWShixuan Wang
- Sichao TanSTSichao Tan
- Ruifeng TianRTRuifeng Tian
Preprint
- 11 September 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
Plate-type fuel elements are attractive for advanced nuclear reactors because of their high power-to-volume ratio, compact configuration, and potential for high fuel burnup. Their coolant channels are typically characterized by narrow gaps of 1–3 mm and large aspect ratios, for which conventional onset-of-significant-void (OSV) correlations developed primarily from circular-tube data may exhibit limited applicability because of geometric confinement effects. To address this limitation, a confinement-aware semi-mechanistic OSV model for narrow rectangular channels is developed based on the bubble-coalescence mechanism. The critical void fraction is related to the bubbly-to-slug flow transition criterion for narrow rectangular channels, while the influence of different wall heat-flux partitioning treatments is examined using the Chen and RPI models. A pressure-dependent multiplier, F_press, and the Bond number, Bo, are further incorporated into the correlation for the adjustable parameter C_3 to account for pressure and geometric effects. The model parameters are calibrated separately for P≤1MPa and P>1MPa using a database containing 119 experimental data points from rectangular channels. The modified correlations substantially reduce the systematic underprediction exhibited by the original Okawa model in the high-pressure regime. The Chen-based formulation yields MAREs of 26.2% and 24.2% for P≤1MPa and P>1MPa, respectively, whereas the corresponding values obtained with the RPI-based formulation are 27.6% and 22.1%. Thus, the Chen-based formulation shows slightly greater robustness in the low-pressure regime, while the RPI-based formulation provides the best agreement with the database at high pressure. Overall, the proposed modifications improve the ability of the bubble-coalescence framework to reproduce OSV behavior in narrow rectangular channels and provide a physically informed basis for further development of OSV prediction methods for the thermal-hydraulic design of plate-type fuel elements.Keywords
This publication has 30 references indexed in Scilit:
- Developing a semi-mechanistic correlation for the onset of significant void in subcooled flow boilingInternational Communications in Heat and Mass Transfer, 2022
- Improvement of the MARS subcooled boiling model for low-pressure, low-Pe flow conditionsAnnals of Nuclear Energy, 2018
- Subcooled flow boiling heat transfer of water in a circular tube under high heat fluxes and high mass fluxesFusion Engineering and Design, 2015
- Visualization study on the mechanisms of net vapor generation in water subcooled flow boiling under moderate pressure conditionsInternational Journal of Heat and Mass Transfer, 2014
- Experimental identification of the phenomenon triggering the net vapor generation in upward subcooled flow boiling of water at low pressureInternational Journal of Heat and Mass Transfer, 2012
- The onset of significant void in up-flow boiling of water at low pressure and velocitiesInternational Journal of Heat and Mass Transfer, 1987
- Determination of the initial point of net vapor generation in flow boiling systemsInternational Journal of Heat and Mass Transfer, 1975
- Forced convection subcooled boiling—prediction of vapor volumetric fractionInternational Journal of Heat and Mass Transfer, 1967
- A photographic study of pool boiling in the region of the critical heat fluxAIChE Journal, 1960
- Dynamics of vapor bubbles and boiling heat transferAIChE Journal, 1955