Ruifeng Tian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ruifeng Tian has a total of 60 co-authors. Here are the top co-authors by number of shared publications:
- Bo Wang
Fundamental Science on Nuclear Safety and Simulation Technology Laboratory, Harbin Engineering University, Harbin 150001, China
7 shared publications Sichao Tan
7 shared publicationsJiming Wen
6 shared publicationsPuzhen Gao
Harbin Engineering University
6 shared publicationsBowen Chen
Fundamental Science on Nuclear Safety and Simulation Technology Laboratory, Harbin Engineering University, Harbin, China
5 shared publications- Sichao Tan
College of Nuclear Science and Technology, Harbin Engineering University, Harbin 150001, China
5 shared publications
Latest Publications
- Open Access
- 11 September 2026
- Published by Elsevier in SSRN Electronic Journal
Study on the Onset of Significant Void in Subcooled Boiling in Narrow Rectangular Channels Based on Bubble Coalescence
Plate-type fuel elements are attractive for advanced nuclear reactors because of their high power-to-volume ratio, compact configuration, and potential for high fuel burnup. Their coolant channels are typically characterized by narrow gaps of 1–3 mm and large aspect ratios, for which conventional onset-of-significant-void (OSV) correlations developed primarily from circular-tube data may exhibit limited applicability because of geometric confinement effects. To address this limitation, a confinement-aware semi-mechanistic OSV model for narrow rectangular channels is developed based on the bubble-coalescence mechanism. The critical void fraction is related to the bubbly-to-slug flow transition criterion for narrow rectangular channels, while the influence of different wall heat-flux partitioning treatments is examined using the Chen and RPI models. A pressure-dependent multiplier, F_press, and the Bond number, Bo, are further incorporated into the correlation for the adjustable parameter C_3 to account for pressure and geometric effects. The model parameters are calibrated separately for P≤1MPa and P>1MPa using a database containing 119 experimental data points from rectangular channels. The modified correlations substantially reduce the systematic underprediction exhibited by the original Okawa model in the high-pressure regime. The Chen-based formulation yields MAREs of 26.2% and 24.2% for P≤1MPa and P>1MPa, respectively, whereas the corresponding values obtained with the RPI-based formulation are 27.6% and 22.1%. Thus, the Chen-based formulation shows slightly greater robustness in the low-pressure regime, while the RPI-based formulation provides the best agreement with the database at high pressure. Overall, the proposed modifications improve the ability of the bubble-coalescence framework to reproduce OSV behavior in narrow rectangular channels and provide a physically informed basis for further development of OSV prediction methods for the thermal-hydraulic design of plate-type fuel elements.
- 11 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessStudy on the Onset of Significant Void in Subcooled Boiling in Narrow Rectangular Channels Based on Bubble Coalescence
Plate-type fuel elements are attractive for advanced nuclear reactors because of their high power-to-volume ratio, compact configuration, and potential for high fuel burnup. Their coolant channels are typically characterized by narrow gaps of 1–3 mm and large aspect ratios, for which conventional onset-of-significant-void (OSV) correlations developed primarily from circular-tube data may exhibit limited applicability because of geometric confinement effects. To address this limitation, a confinement-aware semi-mechanistic OSV model for narrow rectangular channels is developed based on the bubble-coalescence mechanism. The critical void fraction is related to the bubbly-to-slug flow transition criterion for narrow rectangular channels, while the influence of different wall heat-flux partitioning treatments is examined using the Chen and RPI models. A pressure-dependent multiplier, F_press, and the Bond number, Bo, are further incorporated into the correlation for the adjustable parameter C_3 to account for pressure and geometric effects. The model parameters are calibrated separately for P≤1MPa and P>1MPa using a database containing 119 experimental data points from rectangular channels. The modified correlations substantially reduce the systematic underprediction exhibited by the original Okawa model in the high-pressure regime. The Chen-based formulation yields MAREs of 26.2% and 24.2% for P≤1MPa and P>1MPa, respectively, whereas the corresponding values obtained with the RPI-based formulation are 27.6% and 22.1%. Thus, the Chen-based formulation shows slightly greater robustness in the low-pressure regime, while the RPI-based formulation provides the best agreement with the database at high pressure. Overall, the proposed modifications improve the ability of the bubble-coalescence framework to reproduce OSV behavior in narrow rectangular channels and provide a physically informed basis for further development of OSV prediction methods for the thermal-hydraulic design of plate-type fuel elements.
- Open Access
- 11 August 2026
- Published by Elsevier in SSRN Electronic Journal
Evolution of Jet Structure and Transient Loads of Unstable Under-Expanded Submerged Steam Jets
The condensation oscillation of under-expanded submerged steam jets is a significant phenomenon in nuclear reactor containment suppression systems. This study focuses on the transient injection, employing high-speed photography and high-frequency dynamic pressure measurements to investigate the behavior of unstable jets and the induced loads. The jet evolution is divided into an early stage and a quasi-steady stage, revealing that the early oscillation is characterized by radial damped oscillations. Based on time-averaged images, the quasi-steady flow regimes are classified into three typical morphologies: conical, double expansion-contraction, and expansion-contraction, and the corresponding regime map is constructed. Three sets of semi-empirical correlations for the dimensionless penetration length, quasi-steady maximum expansion ratio, and maximum instantaneous expansion ratio are obtained by fitting the experimental data. For theoretical modeling, the transient jet oscillation is modeled as the radial pulsation of a spherical bubble in subcooled water. Based on the Rayleigh-Plesset equation and the perturbation assumption, a radial damped oscillation model is established, and analytical formulas for the maximum pressure amplitude and dominant frequency are derived. Validated against experimental data, the prediction errors of the theoretical model for the maximum pressure amplitude and dominant frequency fall within the ranges of -15% to +20% and -15% to +25%. This model can effectively evaluate the transient loads induced by unstable under-expanded steam jets, providing a theoretical basis for the transient safety analysis of Direct Contact Condensation in nuclear reactor containments.
- 11 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessEvolution of Jet Structure and Transient Loads of Unstable Under-Expanded Submerged Steam Jets
The condensation oscillation of under-expanded submerged steam jets is a significant phenomenon in nuclear reactor containment suppression systems. This study focuses on the transient injection, employing high-speed photography and high-frequency dynamic pressure measurements to investigate the behavior of unstable jets and the induced loads. The jet evolution is divided into an early stage and a quasi-steady stage, revealing that the early oscillation is characterized by radial damped oscillations. Based on time-averaged images, the quasi-steady flow regimes are classified into three typical morphologies: conical, double expansion-contraction, and expansion-contraction, and the corresponding regime map is constructed. Three sets of semi-empirical correlations for the dimensionless penetration length, quasi-steady maximum expansion ratio, and maximum instantaneous expansion ratio are obtained by fitting the experimental data. For theoretical modeling, the transient jet oscillation is modeled as the radial pulsation of a spherical bubble in subcooled water. Based on the Rayleigh-Plesset equation and the perturbation assumption, a radial damped oscillation model is established, and analytical formulas for the maximum pressure amplitude and dominant frequency are derived. Validated against experimental data, the prediction errors of the theoretical model for the maximum pressure amplitude and dominant frequency fall within the ranges of -15% to +20% and -15% to +25%. This model can effectively evaluate the transient loads induced by unstable under-expanded steam jets, providing a theoretical basis for the transient safety analysis of Direct Contact Condensation in nuclear reactor containments.
- 2 January 2026
- Published by Springer Nature
- p. 755-767
A Deep Learning Modeling Approach for the Reconstruction of Flow Field Parameter Distributions Towards PIV Fine Measurements
- 2 January 2026
- Published by Springer Nature
- p. 755-767
A Deep Learning Modeling Approach for the Reconstruction of Flow Field Parameter Distributions Towards PIV Fine Measurements
- 2 January 2026
- Published by Springer Nature
- p. 513-528
Simulation Research on Pressure Control of Steam-Gas Pressurizer Based on Neural Network Adaptive PID Method
- 2 January 2026
- Published by Springer Nature
- p. 513-528
Simulation Research on Pressure Control of Steam-Gas Pressurizer Based on Neural Network Adaptive PID Method
- 2 January 2026
- Published by Springer Nature
- p. 555-564
Study on Overconfidence Characteristic of Deep Learning-Based Fault Diagnostic Models for Nuclear Power Plants
- 2 January 2026
- Published by Springer Nature
- p. 555-564
Study on Overconfidence Characteristic of Deep Learning-Based Fault Diagnostic Models for Nuclear Power Plants
- 9 November 2025
- Published by Springer Nature
- p. 633-643
Numerical Simulation and Performance Optimization of Wire Mesh Demisters
- 9 November 2025
- Published by Springer Nature
- p. 633-643
Numerical Simulation and Performance Optimization of Wire Mesh Demisters
- 9 November 2025
- Published by Springer Nature
- p. 59-69
Study on the Migration and Deposition Characteristics of Insoluble Particles in LBE Within the Wire Wrapping Channel
- 9 November 2025
- Published by Springer Nature
- p. 59-69
Study on the Migration and Deposition Characteristics of Insoluble Particles in LBE Within the Wire Wrapping Channel
- 9 November 2025
- Published by Springer Nature
- p. 661-670
Evolutionary Multi-Criterion Optimization of Operational Parameters for Ocean Nuclear Power Plants Based on Surrogate Models
- 9 November 2025
- Published by Springer Nature
- p. 661-670
Evolutionary Multi-Criterion Optimization of Operational Parameters for Ocean Nuclear Power Plants Based on Surrogate Models
- 1 September 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (9)
Development of a Collision–Deposition–Removal model and study on deposition behaviors in lead–bismuth eutectic wire-wrapped rod bundles
Particle deposition in lead–bismuth eutectic (LBE) cooled fast reactors severely compromises safety and efficiency. Conventional wall models exhibit limitations in accurately describing the complex coupling effects of particle collision, rebound, rolling, sliding, adhesion, and removal under operational conditions. To address this deficiency, this study innovatively develops a Collision–Deposition–Removal coupled boundary model via secondary development based on collision theory and particle removal theory, which can clearly capture various states of particles after collision with the wall. In this study, we conducted detailed sensitivity analysis of the model and explored the governing mechanisms of particle properties, fluid parameters, and particle forces on deposition behaviors. Systematic investigations reveal: The Saffman lift force universally enhances deposition across all particle sizes (≤80% max), whereas buoyancy and virtual mass forces exhibit size-dependent deposition promotion (for dp > 16 μm and dp < 32 μm, respectively). The particle yield stress inhibits deposition of dp > 10 μm by increasing the proportion of elastic collisions. Particle density exhibits a negative correlation with the deposition of dp < 25 μm. Fluid velocity demonstrates a dual mechanism that is contingent on particle size: it facilitates deposition through collisions for dp < 10 μm and impedes deposition through removal for dp > 20 μm. These findings establish essential theoretical foundations and provide critical design parameters for optimizing filtration systems and anti-deposition strategies in LBE reactors.
- 1 September 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (9)
Development of a Collision–Deposition–Removal model and study on deposition behaviors in lead–bismuth eutectic wire-wrapped rod bundles
Particle deposition in lead–bismuth eutectic (LBE) cooled fast reactors severely compromises safety and efficiency. Conventional wall models exhibit limitations in accurately describing the complex coupling effects of particle collision, rebound, rolling, sliding, adhesion, and removal under operational conditions. To address this deficiency, this study innovatively develops a Collision–Deposition–Removal coupled boundary model via secondary development based on collision theory and particle removal theory, which can clearly capture various states of particles after collision with the wall. In this study, we conducted detailed sensitivity analysis of the model and explored the governing mechanisms of particle properties, fluid parameters, and particle forces on deposition behaviors. Systematic investigations reveal: The Saffman lift force universally enhances deposition across all particle sizes (≤80% max), whereas buoyancy and virtual mass forces exhibit size-dependent deposition promotion (for dp > 16 μm and dp < 32 μm, respectively). The particle yield stress inhibits deposition of dp > 10 μm by increasing the proportion of elastic collisions. Particle density exhibits a negative correlation with the deposition of dp < 25 μm. Fluid velocity demonstrates a dual mechanism that is contingent on particle size: it facilitates deposition through collisions for dp < 10 μm and impedes deposition through removal for dp > 20 μm. These findings establish essential theoretical foundations and provide critical design parameters for optimizing filtration systems and anti-deposition strategies in LBE reactors.
- Open Access
Experimental study on corrugated plate dryer in steam generator under hot working conditions