The Preparation and Properties of Ti(Nb)-Si-C Coating on the Pre-Oxidized Ferritic Stainless Steel for Solid Oxide Fuel Cell Interconnect
Open Access
Abstract
Cr2O3 scale growth and volatilization are the main cause of the performance degradation of solid oxide fuel cells (SOFCs) with an Fe-based ferritic stainless steel (FSS) interconnect. In this work, an amorphous Ti(Nb)-Si-C coating is prepared on the pre-oxidized SUS430 with D.C. magnetron sputtering as the protective coating. The amorphous Ti(Nb)-Si-C coated alloy exhibits significantly enhanced oxidation resistance, and the oxidation kinetics obey the parabolic law with a low parabolic rate of 9.36 × 10−15 g2·cm−4·s−1. A dual-layer oxide scale is formed composed of an inner layer rich in Cr2O3 and an outer layer rich in rutile TiO2 and amorphous SiO2. MnCr2O4 appears at the interface between the inner and outer oxide layers. Meanwhile, the amorphous Ti(Nb)-Si-C coating also effectively blocks the outward diffusion of Cr. In addition, the coated steel presents good electrical properties with an area-specific resistance (ASR) of 13.57 mΩ·cm2 at 800 °C after oxidation at 800 °C in air for 500 h.Keywords
Funding Information
- National Natural Science Foundation of China (No. 52001179, No. ZR2020ME019)
- Natural Science Foundation of Shandong Province (No. 52001179, No. ZR2020ME019)
This publication has 45 references indexed in Scilit:
- Oxidation behavior of coated and preoxidized ferritic steel in single and dual atmosphere exposures at 800°CSurface and Coatings Technology, 2012
- Investigation on the properties of Nb and Al doped Ti3SiC2 as a new interconnect material for IT-SOFCInternational Journal of Hydrogen Energy, 2012
- Electrodeposition of yttria/cobalt oxide and yttria/gold coatings onto ferritic stainless steel for SOFC interconnectsJournal of Power Sources, 2010
- A review of recent progress in coatings, surface modifications and alloy developments for solid oxide fuel cell ferritic stainless steel interconnectsJournal of Power Sources, 2010
- Cyclic oxidation of Mn–Co spinel coated SUS 430 alloy in the cathodic atmosphere of solid oxide fuel cellsJournal of Power Sources, 2008
- Oxidation Resistance Coating of LSM and LSCF on SOFC Metallic Interconnects by the Aerosol Deposition ProcessJournal of the American Ceramic Society, 2007
- Metallic interconnects for solid oxide fuel cellsMaterials Science and Engineering: A, 2005
- Application of Fe–16Cr ferritic alloy to interconnector for a solid oxide fuel cellSolid State Ionics, 2001
- Microstructure and mechanism of damage tolerance for Ti3SiC2bulk ceramicsMaterials Research Innovations, 1999
- Synthesis and Characterization of a Remarkable Ceramic: Ti3SiC2Journal of the American Ceramic Society, 1996