Fluxless die bonding of high power laser bars using the AuSn-metallurgy
Authors:
- V. BaderVBV. Bader
- G. AzdashtGAG. Azdasht
- P. KasulkePKP. Kasulke
- E. ZakelEZE. Zakel
- H. ReichlHRH. Reichl
- 22 November 2002
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 05695503,p. 780-787
Abstract
This paper presents a new concept for a fluxless package design for commercial high power laser bars. The laser bars are soldered on CuW heatsinks using Au(80)Sn(20) solder. Then a Cu lead is bonded with the FPC method (Fiber-Push-Connection) as a cap and electrical contact. Finally, the heatsink is mounted on a Cu microchannel cooler with Pb(37)Sn(63). We describe the mounting processes in detail, showing the large bonding window for soldering with Au(80)Sn(20), which is necessary for industrial production. The metallurgy of the Au(80)Sn(20) bonding interface is not dependent on the bond parameters in the area of the bonding window. Electro-optical characterizations show excellent performance of the laser bars. An accelerated aging test gives a first indicator of the high reliability of this package concept.Keywords
This publication has 17 references indexed in Scilit:
- A novel bonding technique to bond CTE mismatched devices2002
- The use of the FPC-laser method for different chip interconnection techniques2002
- High-power high-T0 native oxide stripe-geometry 980-nm laser diodes1996
- Laser Projector Technology1996
- Applications of diamond made by chemical-vapor deposition semiconductor laser submounts1993
- 120 W CW output power from monolithic AlGaAs (800 nm) laser diode array mounted on diamond heatsinkElectronics Letters, 1992
- Bonding stress measurements from the degree of polarization of facet emission of AlGaAs superluminescent diodesIEEE Journal of Quantum Electronics, 1991
- Failure Modes of InGaAsP/InP Lasers Due to AdhesivesIEEE Transactions on Components, Hybrids, and Manufacturing Technology, 1984
- Reliability in InGaAsP/InP buried heterostructure 1.3 µm lasersIEEE Journal of Quantum Electronics, 1983
- Analysis of deterioration in In solder for GaAlAs DH lasersApplied Physics Letters, 1979