Development of the applicability of simplified Henry’s method for skewed multicell box-girder bridges under traffic loading conditions
- 9 December 2012
- journal article
- Published by Zhejiang University Press in Journal of Zhejiang University-SCIENCE A
- Vol. 13 (12) , 915-925
Abstract
Concrete precast multicell box-girder (MCB) bridges combine aesthetics with torsional stiffness perfectly. Previous analytical studies indicate that currently available specifications are unable to consider the effect of the twisting moment (torsional moment) on bridge actions. In straight bridges the effect of torsion is negligible and the transverse reinforced design is governed by other requirements. However, in the case of skewed bridges the effect of the twisting moment should be considered. Therefore, an in-depth study was performed on 90 concrete MCB bridges with skew angles ranging from 0° to 60°. For each girder the bridge actions were determined under the American Association of State Highway and Transportation Officials (AASHTO) live load conditions. The analytical results show that torsional stiffness and live load positions greatly affected the bridges’ responses. In addition, based on a statistical analysis of the obtained results, several skew correction factors are proposed to improve the precision of the simplified Henry’s method, which is widely used by bridge engineers to predict bridge actions. The relationship between the bending moment and secondary moments was also investigated and it was concluded that all secondary actions increase with an increase in skewness.Keywords
This publication has 18 references indexed in Scilit:
- Moment and Shear Load Distribution Factors for Multigirder Bridges Subjected to OverloadsJournal of Bridge Engineering, 2012
- Live Load Distribution Formulas for Single-Span Prestressed Concrete Integral Abutment Bridge GirdersJournal of Bridge Engineering, 2009
- Effect of Skewness on the Distribution of Live Load Reaction at Piers of Skewed Continuous BridgesJournal of Bridge Engineering, 2008
- Evaluation of dynamic loads on a skew box girder continuous bridge Part I: Field test and modal analysisEngineering Structures, 2007
- Simplified Method for Calculating Lateral Distribution Factors for Live Load ShearJournal of Bridge Engineering, 2005
- Distortional Loads and Brace Forces in Steel Box GirdersJournal of Structural Engineering, 2002
- Torsional Analysis for Prestressed Concrete Multiple Cell BoxJournal of Engineering Mechanics, 2001
- Shear and Reaction Distributions in Continuous Skew Composite BridgesJournal of Bridge Engineering, 1996
- The grillage analogy in bridge analysisCanadian Journal of Civil Engineering, 1982
- Solid Cross Sections1969