IMIman Mohseni

Iman Mohseni

*This is an algorithmically generated author record based on publicly available information.

Iman Mohseni has a total of 4 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A simplified method to estimate the fundamental frequency of skew continuous multicell box-girder bridges

    by Iman Mohseni, Abdul Khalim Abdul Rashid, Junsunk Kang

    Here Fundamental Frequency is the main factor used to calculate the vibration of a vehicle when passing across a bridge. With knowledge of the fundamental frequency, bridges can be evaluated and designed in such a manner so as to avoid the critical range of 1.5 Hz to 4.5 Hz, which is occupied by most vehicles. Therefore it is crucial to develop a reliable method to estimate the fundamental frequency of bridges. To overcome the above issue, numerical analysis combined with a theoretical method is applied to estimate the fundamental frequency of multicell box-girder bridges. The effect of span-length, number of boxes and skew angle on the estimation of this factor is discussed. Finally, reliable expressions are proposed to predict the first fundamental frequency of this type of bridge, and the accuracy of the expressions is verified. The results indicate that the fundamental frequency decreases when span length increases, due to development of crack as well as decrease stiffness of girders.


  • Open Access

    Transverse load distribution of skew cast-in-place concrete multicell box - girder bridges subjected to traffic condition

    by Iman Mohseni, A. Khalim Rashid

    Concrete multicell box-girder bridges are a common choice among the designers for various ranges of bridges. In order to provide safer and greater speed of traffic, the roadway is built as straight as possible. The use of skewed bridges has increased considerably in the recent years for roadway. The skewed bridges have quite different mechanical behavior from the straight bridges, although for skew angles less than 20 degrees, it is reasonably safe to ignore the effect of skew angles and analyze that at the straight bridge. In this study, in developing an analytical solution, an extensive parametric study was carried out to determine the maximum positive and negative stress distribution factors and to calculate the maximum distribution factor of deflection along the mid-span of skewed multicell box-girder bridges. A total of 240 representative bridges numerical models were selected and analyzed using SAP2000 finite element software. It was found that the span length, number of boxes, number of lanes and skew angles significantly affected the distribution factors of stress and deflection. Finally, several equations were proposed for stress and deflection distribution factors of multicell box-girder bridges for the application of American Association of State Highway and Transportation officials load and resistance factor design live loads.


  • Development of the applicability of simplified Henry’s method for skewed multicell box-girder bridges under traffic loading conditions

    by Iman Mohseni, A. R. Khalim Rashid

    Concrete precast multicell box-girder (MCB) bridges combine aesthetics with torsional stiffness perfectly. Previous analytical studies indicate that currently available specifications are unable to consider the effect of the twisting moment (torsional moment) on bridge actions. In straight bridges the effect of torsion is negligible and the transverse reinforced design is governed by other requirements. However, in the case of skewed bridges the effect of the twisting moment should be considered. Therefore, an in-depth study was performed on 90 concrete MCB bridges with skew angles ranging from 0° to 60°. For each girder the bridge actions were determined under the American Association of State Highway and Transportation Officials (AASHTO) live load conditions. The analytical results show that torsional stiffness and live load positions greatly affected the bridges’ responses. In addition, based on a statistical analysis of the obtained results, several skew correction factors are proposed to improve the precision of the simplified Henry’s method, which is widely used by bridge engineers to predict bridge actions. The relationship between the bending moment and secondary moments was also investigated and it was concluded that all secondary actions increase with an increase in skewness.