The electrochemical behavior of Ti‐6Al‐7Nb alloy with and without plasma‐sprayed hydroxyapatite coating in Hank's solution
- 1 January 2002
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research
- Vol. 63 (5) , 664-670
Abstract
The electrochemical behavior of Ti‐6Al‐7Nb alloy with and without plasma‐sprayed hydroxyapatite (HA) coating was investigated in Hank's balanced salt solution at 37 °C. This behavior was evaluated by analyzing both corrosion potential variation with time curves and potentiodynamic polarization curves. The polarization curves were determined both in aerated and deaerated solutions. It was found that the corrosion potential of uncoated sample is always more noble than that of coated one. In aerated solutions the polarization curve of a coating‐free alloy presents a typical passive/transpassive behavior, which is absent in the HA‐coated alloy and in deaerated solution for both coated and uncoated conditions. In the latter polarization curves, the current density continuously increases with the increase of the potential. The corrosion rate determined from polarization curves is higher for HA‐coated alloys, but it still can be considered negligible (less than 1 μA/cm2). © 2002 Wiley Periodicals, Inc. J Biomed Mater Res (Appl Biomater) 63: 664–670, 2002Keywords
This publication has 11 references indexed in Scilit:
- In vitro and in vivo biocompatibility testing of Ti‐6Al‐7Nb alloy with and without plasma‐sprayed hydroxyapatite coatingJournal of Biomedical Materials Research, 2001
- Study of the corrosion behavior of titanium and some of its alloys for biomedical and dental implant applicationsJournal of Electroanalytical Chemistry, 1999
- Interfacial characterization of plasma-spray coated calcium phosphate on Ti–6Al–4VJournal of Materials Science: Materials in Medicine, 1998
- Effect of different surface finishing and of hydroxyapatite coatings on passive and corrosion current of Ti6Al4V alloy in simulated physiological solutionBiomaterials, 1997
- Mechanical and chemical consequences of the residual stresses in plasma sprayed hydroxyapatite coatingsBiomaterials, 1997
- Investigation of the dissolution of the bioceramic hydroxyapatite in the presence of titanium ions using ToF-SIMS and XPSBiomaterials, 1997
- Electrochemical behaviour of hydroxyapatite-coated stainless steel implantsJournal of Materials Science Letters, 1997
- Effect of hydroxyapatite thickness on metal ion release from Ti6Al4V substratesBiomaterials, 1996
- Calcium phosphate ceramic coatings on porous titanium: effect of structure and composition on electrophoretic deposition, vacuum sintering and in vitro dissolutionBiomaterials, 1990
- Electrochemical Behavior of Passive Layers on TitaniumCorrosion, 1982