Mechanical aging trend in ethylene propylene rubber-insulated safety cables sampled from bwr nuclear power containment
- 23 October 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Dielectrics and Electrical Insulation
- Vol. 21 (5) , 2012-2019
Abstract
Statistical analysis has been performed on variously aged ethylene propylene rubber insulation on cables removed from boiling water reactor-type containment. Temperature and dose rate conditions of such cables are not identical. Therefore, elongation at break data observed for such insulation are converted to each equivalent period under 60 °C, 10 mGy/h condition. The aging trend is found to be approximately slower by half than that expected from accelerated aging test results. Furthermore, this aging trend is used as a reference to fit to each elongation value, and the fitted curve is extrapolated to find the end of service life, which is defined as 70 % of absolute elongation. Lifetimes estimated from this method and from predictions by the accelerated aging test are compared on an Arrhenius plot. It is suggested that the latter lifetime estimation is shorter than actual. The temperature dependence also suggests a difference in a basic chemical reaction under the two aging conditions, which results in apparent differences in activation energies and pre-exponential factors.Keywords
This publication has 9 references indexed in Scilit:
- Kinetic degradation model for insulating materials used on nuclear power plant safety cablesIEEE Transactions on Dielectrics and Electrical Insulation, 2014
- Position of long-term prediction model in aging management of nuclear power plant safety cables2013
- Relationship between Remaining Antioxidant Content and Radiation-Thermal Degradation in Crosslinked PolyethyleneIEEJ Transactions on Fundamentals and Materials, 2013
- Review of nuclear power plant safety cable aging studies with recommendations for improved approaches and for future work.2010
- Accelerated aging and lifetime prediction: Review of non-Arrhenius behaviour due to two competing processesPolymer Degradation and Stability, 2005
- Dose-rate effects on the radiation-induced oxidation of electric cable used in nuclear power plantsRadiation Physics and Chemistry, 1995
- A Practical Model for Prediction of the Lifetime of Elastomeric Seals in Nuclear Environments1991
- Time-temperature-dose rate superposition: A methodology for extrapolating accelerated radiation aging data to low dose rate conditionsPolymer Degradation and Stability, 1989
- Investigation of Cable Deterioration Inside Reactor ContainmentNuclear Technology, 1982