Tensile and fatigue behavior of oxide/oxide ceramic matrix composite with simulated foreign object damage in combustion environment
Authors:
- 20 August 2017
- journal article
- research article
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 15 (1) , 16-27
Abstract
In this study, oxide/oxide ceramic matrix composite test coupons were quasi‐statically indented and tested for tensile strength and fatigue life in a combustion environment. The combustion environment simulated the gas turbine engine environment in an aircraft. Two different dent sizes were created on two different sets of test coupons with a blunt conical indentor. During mechanical testing, the combustion flame simultaneously impinged on the dent region resulting in a maximum test coupon surface temperature of 1250 ± 50°C. For a life of 90 000 cycles, the fatigue limit in the combustion environment was 85% of the postindentation degraded tensile strength. Microscopy images of the failed test coupons showed damage modes of fiber fracture and matrix cracking at the dent site. The run‐out test coupons which did not fail within 90 000 cycles showed residual strength that was not significantly different from that of their virgin counterparts.Keywords
This publication has 24 references indexed in Scilit:
- High-velocity impact damage behavior of plain-woven SiC/SiC composites after thermal loadingComposites Part B: Engineering, 2012
- Damage analysis of thin 3D-woven SiC/SiC composite under low velocity impact loadingComposites Part A: Applied Science and Manufacturing, 2012
- Simultaneous Fatigue and Combustion Exposure of a SiC/SiC Ceramic Matrix CompositeJournal of Composite Materials, 2010
- Experimental characterization of high-speed impact damage behavior in a three-dimensionally woven SiC/SiC compositeComposites Part A: Applied Science and Manufacturing, 2010
- Low Velocity Impact Damage Evaluation of 2D C/SiC Composite MaterialAdvanced Materials Research, 2009
- Foreign Object Damage in an Oxide/Oxide Composite at Ambient TemperatureJournal of Engineering for Gas Turbines and Power, 2008
- Foreign Object Damage Phenomenon by Steel Ball Projectiles in a SiC/SiC Ceramic Matrix Composite at Ambient and Elevated TemperaturesJournal of the American Ceramic Society, 2008
- Processing of damage-tolerant, oxidation-resistant ceramic matrix composites by a precursor infiltration and pyrolysis methodMaterials Science and Engineering: A, 1995
- Ceramic Composites of Monazite and AluminaJournal of the American Ceramic Society, 1995
- Chemical kinetic reaction mechanism for the combustion of propaneCombustion and Flame, 1984