High‐gain end‐fire bow‐tie antenna using artificial dielectric layers
Open Access
- 1 September 2015
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in IET Microwaves, Antennas & Propagation
- Vol. 9 (12) , 1254-1259
Abstract
This study presents a high‐gain bow‐tie antenna for applications in next generation base‐stations operating from 2.5 to 3.9 GHz. The proposed structure consists of three circular sector patches that are attached laterally to the microstrip feed‐line, which is etched on both sides of the common dielectric substrate to create symmetrical bow‐tie antenna. By loading the antenna with a 2 × 5 array of enhanced end‐coupled split‐ring (EECSR) unit‐cells results in significant enhancement in the antenna gain performance. This is because the EECSR unit‐cells behave as parasitic radiators, which is analogous to Yagi–Uda antennas. The EECSR unit‐cells provide a medium of high effective permittivity that effectively reduces the spacing between parasitic directors. As a consequence, a compact and miniature structure is achieved compared with conventional quasi‐Yagi–Uda planar designs. The dimension of EECSR unit‐cell is 33 × 36 mm 2 with inter‐element spacing of 0.075 λ 0 at 3.5 GHz. A prototype of the antenna was fabricated and its performance was measured to validate the simulation results. The measured peak gain of the antenna with 4 × 5 array of EECSR is 12.65 dBi at 3.73 GHz, constituting a peak gain enhancement of 7.45 dBi in the Worldwide Interoperability for Microwave Access band compared with an equivalent conventional bow‐tie antenna.Keywords
This publication has 11 references indexed in Scilit:
- Metamaterial-Based Design of Planar Compact MIMO MonopolesIEEE Transactions on Antennas and Propagation, 2013
- A High Gain Antenna With an Optimized Metamaterial Inspired SuperstrateIEEE Transactions on Antennas and Propagation, 2012
- A Low-Cost Compact Patch Antenna With Beam Steering Based on CSRR-Loaded GroundIEEE Antennas and Wireless Propagation Letters, 2011
- Frequency Switchable Printed Yagi-Uda Dipole Sub-Array for Base Station AntennasIEEE Transactions on Antennas and Propagation, 2011
- Vertically Multilayer-Stacked Yagi Antenna With Single and Dual PolarizationsIEEE Transactions on Antennas and Propagation, 2010
- High-Gain Yagi-Uda Antennas for Millimeter-Wave Switched-Beam SystemsIEEE Transactions on Antennas and Propagation, 2009
- Wideband Periodic Endfire Antenna With Bowtie DipolesIEEE Antennas and Wireless Propagation Letters, 2008
- Simple Broadband Planar CPW-Fed Quasi-Yagi AntennaIEEE Antennas and Wireless Propagation Letters, 2007
- Robust method to retrieve the constitutive effective parameters of metamaterialsPhysical Review E, 2004
- Optimum element spacings for Yagi-Uda arraysIEEE Transactions on Antennas and Propagation, 1973