Abdolmehdi Dadgarpour
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Abdolmehdi Dadgarpour has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
Tayeb A. Denidni
INRS‐EMT, University of Quebec Montreal QC Canada
2 shared publicationsAhmad Rashidy Razali
Faculty of Electrical Engineering Universiti Teknologi MARA Shah Alam Selangor D.E. 40450 Malaysia
1 shared publication- Amin M. Abbosh
The University of Queensland
1 shared publication Bal S. Virdee
Faculty of Computing London Metropolitan University London UK
1 shared publicationBal Singh Virdee
1 shared publicationBehnam Zarghooni
INRS‐EMT, University of Quebec Montreal QC Canada
1 shared publication
Latest Publications
- Open Access
- 1 September 2015
- Published by Institution of Engineering and Technology (IET) in IET Microwaves, Antennas & Propagation
- Vol. 9 (12) , 1254-1259
High‐gain end‐fire bow‐tie antenna using artificial dielectric layers
This study presents a high‐gain bow‐tie antenna for applications in next generation base‐stations operating from 2.5 to 3.9 GHz. The proposed structure consists of three circular sector patches that are attached laterally to the microstrip feed‐line, which is etched on both sides of the common dielectric substrate to create symmetrical bow‐tie antenna. By loading the antenna with a 2 × 5 array of enhanced end‐coupled split‐ring (EECSR) unit‐cells results in significant enhancement in the antenna gain performance. This is because the EECSR unit‐cells behave as parasitic radiators, which is analogous to Yagi–Uda antennas. The EECSR unit‐cells provide a medium of high effective permittivity that effectively reduces the spacing between parasitic directors. As a consequence, a compact and miniature structure is achieved compared with conventional quasi‐Yagi–Uda planar designs. The dimension of EECSR unit‐cell is 33 × 36 mm 2 with inter‐element spacing of 0.075 λ 0 at 3.5 GHz. A prototype of the antenna was fabricated and its performance was measured to validate the simulation results. The measured peak gain of the antenna with 4 × 5 array of EECSR is 12.65 dBi at 3.73 GHz, constituting a peak gain enhancement of 7.45 dBi in the Worldwide Interoperability for Microwave Access band compared with an equivalent conventional bow‐tie antenna.
- 1 September 2015
- Published by Institution of Engineering and Technology (IET) in IET Microwaves, Antennas & Propagation
- Vol. 9 (12) , 1254-1259
Open AccessHigh‐gain end‐fire bow‐tie antenna using artificial dielectric layers
This study presents a high‐gain bow‐tie antenna for applications in next generation base‐stations operating from 2.5 to 3.9 GHz. The proposed structure consists of three circular sector patches that are attached laterally to the microstrip feed‐line, which is etched on both sides of the common dielectric substrate to create symmetrical bow‐tie antenna. By loading the antenna with a 2 × 5 array of enhanced end‐coupled split‐ring (EECSR) unit‐cells results in significant enhancement in the antenna gain performance. This is because the EECSR unit‐cells behave as parasitic radiators, which is analogous to Yagi–Uda antennas. The EECSR unit‐cells provide a medium of high effective permittivity that effectively reduces the spacing between parasitic directors. As a consequence, a compact and miniature structure is achieved compared with conventional quasi‐Yagi–Uda planar designs. The dimension of EECSR unit‐cell is 33 × 36 mm 2 with inter‐element spacing of 0.075 λ 0 at 3.5 GHz. A prototype of the antenna was fabricated and its performance was measured to validate the simulation results. The measured peak gain of the antenna with 4 × 5 array of EECSR is 12.65 dBi at 3.73 GHz, constituting a peak gain enhancement of 7.45 dBi in the Worldwide Interoperability for Microwave Access band compared with an equivalent conventional bow‐tie antenna.
- Open Access
- 1 April 2015
- Published by Institution of Engineering and Technology (IET) in IET Microwaves, Antennas & Propagation
- Vol. 9 (5) , 486-494
Planar antennas for compact multiband transceivers using a microstrip feedline and multiple open‐ended ground slots
Two planar antennas for compact multiband transceivers are presented, that employ an open‐ended microstrip feedline that couples to multiple open‐ended ground slots. The effect of separately introducing each of the slots on the antenna performance is outlined, and it is shown that the resonant frequencies of the antennas can be independently controlled by adjusting the dimensions of the ground slots. Antenna 1, consisting of an open‐ended microstrip feedline that couples to three open‐ended ground slots, exhibits a measured |S 11 | < −6 dB in the frequency ranges of 1.64–3.50 GHz, and 5.22–6.81 GHz, covering the standards of DCS, PCS, UMTS, Wibro, Bluetooth, WiMAX, HiperLAN 2 and WLAN with a measured gain that varies between 1.85 and 3.98 dBi, and with radiation efficiencies in excess of 80%. Antenna 2, consisting of an open‐ended microstrip feedline that couples to four open‐ended ground slots, exhibits a measured |S 11 | < −6 dB in the entire frequency range of 2.74–6.71 GHz, covering the standards of WiMAX, HiperLAN 2 and WLAN with a measured gain that varies between 4.98 and 5.28 dBi, and with radiation efficiencies in excess of 80%. Both antennas occupy a total size of only 40 × 30 × 1.6 mm 3 .
- 1 April 2015
- Published by Institution of Engineering and Technology (IET) in IET Microwaves, Antennas & Propagation
- Vol. 9 (5) , 486-494
Open AccessPlanar antennas for compact multiband transceivers using a microstrip feedline and multiple open‐ended ground slots
Two planar antennas for compact multiband transceivers are presented, that employ an open‐ended microstrip feedline that couples to multiple open‐ended ground slots. The effect of separately introducing each of the slots on the antenna performance is outlined, and it is shown that the resonant frequencies of the antennas can be independently controlled by adjusting the dimensions of the ground slots. Antenna 1, consisting of an open‐ended microstrip feedline that couples to three open‐ended ground slots, exhibits a measured |S 11 | < −6 dB in the frequency ranges of 1.64–3.50 GHz, and 5.22–6.81 GHz, covering the standards of DCS, PCS, UMTS, Wibro, Bluetooth, WiMAX, HiperLAN 2 and WLAN with a measured gain that varies between 1.85 and 3.98 dBi, and with radiation efficiencies in excess of 80%. Antenna 2, consisting of an open‐ended microstrip feedline that couples to four open‐ended ground slots, exhibits a measured |S 11 | < −6 dB in the entire frequency range of 2.74–6.71 GHz, covering the standards of WiMAX, HiperLAN 2 and WLAN with a measured gain that varies between 4.98 and 5.28 dBi, and with radiation efficiencies in excess of 80%. Both antennas occupy a total size of only 40 × 30 × 1.6 mm 3 .
- 1 January 2010
- Published by The Electromagnetics Academy in Progress In Electromagnetics Research Letters
- Vol. 15, 89-98
COMPACT ULTRA-WIDEBAND PHASE SHIFTER
- 1 January 2010
- Published by The Electromagnetics Academy in Progress In Electromagnetics Research Letters
- Vol. 15, 89-98
COMPACT ULTRA-WIDEBAND PHASE SHIFTER