Shear and Tensile Behaviors of Fiber-Reinforced Resin Matrix Composites Printed by the FDM Technology
Open Access
Abstract
Resin/fiber composites were prepared by the FDM printing technology. The effects of arrangements, types (carbon, glass, and Kevlar), and volume fraction of fibers on the shear and tensile properties of resin 3D-printed composites are investigated in this paper. The experimental results show that the addition of continuous fibers increases the shear strength and tensile strength of FDM-3D-printed composites, but the strength will not keep increasing with an increase in the fiber content. As the fiber content increases, the print quality decreases, and the porosity between the fibers increases. The enhancement degree of the shear stress of specimens by different fiber types can be classified as follows: glass fiber > carbon fiber > Kevlar fiber. Notch sensitivity is reduced when the 90° arrangement of fibers is added, while the addition of 0° arranged fibers will improve the notch sensitivity of the sample. The research results of this paper have an important guiding significance for selecting fiber types and arrangement mode of notched components in engineering applications.Keywords
Funding Information
- National Natural Science Foundation of China (52175336, ZR2020ZD05)
- Shandong Natural Science Foundation of China (52175336, ZR2020ZD05)
This publication has 34 references indexed in Scilit:
- Influence of flame retardant magnesium hydroxide on the mechanical properties of high density polyethylene compositesJournal of Reinforced Plastics and Composites, 2017
- Fabrication of continuous carbon, glass and Kevlar fibre reinforced polymer composites using additive manufacturingAdditive Manufacturing, 2017
- Study on microstructure, mechanical properties and machinability of efficiently additive manufactured AISI 316L stainless steel by high-power direct laser depositionJournal of Materials Processing Technology, 2017
- 3D printing of polymer matrix composites: A review and prospectiveComposites Part B: Engineering, 2017
- Evaluation and prediction of the tensile properties of continuous fiber-reinforced 3D printed structuresComposite Structures, 2016
- 3D printing with polymers: Challenges among expanding options and opportunitiesDental Materials, 2016
- Use of 3D Printing by Museums: Educational Exhibits, Artifact Education, and Artifact Restoration3D Printing and Additive Manufacturing, 2015
- Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modelingComposites Part B: Engineering, 2015
- Highly oriented carbon fiber–polymer composites via additive manufacturingComposites Science and Technology, 2014
- A review of melt extrusion additive manufacturing processes: I. Process design and modelingRapid Prototyping Journal, 2014