Effects of lanthanum nitrate buffer layer on the orientation and piezoelectric property of Pb(Zr,Ti)O3 thick film
Authors:
- 1 December 2004
- journal article
- Published by Springer Nature in Journal of Materials Research
- Vol. 19 (12) , 3671-3678
Abstract
Highly oriented Pb(Zr,Ti)O3 (PZT) films were deposited on Pt/Ti/SiO2/Si substrates by the sol-gel method using lanthanum nitrate as a buffer layer. When the lanthanum nitrate buffer layer was heat treated at temperatures between 450 and 550 °C, the PZT layer coated onto this buffer layer showed a strong (100) preferred orientation. Regardless of the other deposition conditions, such as the pyrolysis temperature, pyrolysis time, annealing temperature and heating rate, the film deposited on the buffer layer had this orientation. Thick films were also fabricated using the sol-gel multi-coating method, and the (100) texture was found to be maintained up to a thickness of 10 μm. The ferroelectric hysteresis and piezoelectric coefficient (d33) of highly oriented PZT thick films were characterized, and the (100) oriented PZT film showed higher piezoelectric property than the (111) oriented film.Keywords
This publication has 17 references indexed in Scilit:
- Measurement of piezoelectric coefficients of lead zirconate titanate thin films by strain-monitoring pneumatic loading methodApplied Physics Letters, 2002
- PZT thin films with preferred-orientation induced by external stressThin Solid Films, 2000
- Growth of (100)-oriented LaNiO3 thin films directly on Si substrates by a simple metalorganic decomposition technique for the highly oriented PZT thin filmsJournal of Crystal Growth, 2000
- Single‐Step Dip Coating of Crack‐Free BaTiO3 Films >1 μm Thick: Effect of Poly(vinylpyrrolidone) on Critical ThicknessJournal of the American Ceramic Society, 2000
- Oriented Lead Titanate Film Growth at Lower Temperatures by the Sol‐Gel Method on Particle‐Seeded SubstratesJournal of the American Ceramic Society, 1997
- Nucleation‐ or Growth‐Controlled Orientation Development in Chemically Derived Ferroelectric Lead Zirconate Titanate (Pb(Zr
x
Ti
1−
x
)O 3 , x = 0.4) Thin FilmsJournal of the American Ceramic Society, 1996
- Orientation of rapid thermally annealed lead zirconate titanate thin films on (111) Pt substratesJournal of Materials Research, 1994
- Temperature–Time Texture Transition of Pb(Zr1−xTix)O3 Thin Films: II, Heat Treatment and Compositional EffectsJournal of the American Ceramic Society, 1994
- Temperature–Time Texture Transition of Pb(Zr
1−
x
Ti
x
)O
3
Thin Films: I, Role of Pb‐rich Intermediate PhasesJournal of the American Ceramic Society, 1994
- Low temperature perovskite formation of lead zirconate titanate thin films by a seeding processJournal of Materials Research, 1993