Fabrication of high performance amine-rich magnetic composite fibers for the recovery of precious Pt( iv ) from acidic solutions
- 12 September 2016
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (92) , 89089-89097
Abstract
Magnetic nanoparticles (MNPs) possessing a high surface to volume ratio, copious chemically active sites, and ease of separation from aqueous solutions are emerging materials for water treatment. Further encapsulation of these nanoparticles (NPs) with polymeric materials may protect these NPs from direct contact with the aqueous environment and also enhance their sorption efficiency. In the case of polymer fibers, breakage will occur depending on environmental conditions, and the addition of MNPs in fibers will provide an opportunity for the complete recovery of fibers after the sorption process. In the present study, a mixed solution of amine-rich chitosan (CS) and polyethyleneimine (PEI) containing magnetic MnFe2O4 nanoparticles was utilized for fabricating versatile and robust magnetic polymer composite fibers (MPCFs) in a facile methodology. The effective fabrication of MPCFs was confirmed by using analytical techniques such as FTIR, XRD, VSM, FE-SEM, and TEM. Morphological characterization demonstrated that MnFe2O4 nanoparticles were well distributed in the composite fibers. Detailed batch sorption experiments revealed that MPCFs exhibited significant improvement in adsorption efficiency compared with bare MnFe2O4 nanoparticles. The MPCFs exhibited high adsorption capacity (371.35 ± 16.79 mg g−1) and fast equilibrium (within 30 min). The Pt-loaded MPCFs were easily separated from aqueous solution under an external magnetic field. It can be concluded that MPCFs with amine-rich functional groups and magnetic properties are promising for Pt adsorption from aqueous solutions.Keywords
Funding Information
- National Research Foundation of Korea (NRF-2014R1A2A1A09007378)
This publication has 55 references indexed in Scilit:
- Platinum: Environmental Pollution and Health Effects2011
- Synthesis and adsorption properties of spongelike porous MnFe2O4Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2010
- Chitosan-Coated Octadecyl-Functionalized Magnetite Nanoparticles: Preparation and Application in Extraction of Trace Pollutants from Environmental Water SamplesAnalytical Chemistry, 2010
- Preparation of Fe3O4/PVA nanofibers via combining in-situ composite with electrospinningMaterials Letters, 2010
- Adsorption of platinum(IV) and palladium(II) from aqueous solution by thiourea-modified chitosan microspheresJournal of Hazardous Materials, 2009
- Crosslinking of chitosan membranes using glutaraldehyde: Effect on ion permeability and water absorptionJournal of Membrane Science, 2007
- Magnetic Nanoparticles: Synthesis, Protection, Functionalization, and ApplicationAngewandte Chemie International Edition, 2007
- Second-order kinetic model for the sorption of cadmium onto tree fern: A comparison of linear and non-linear methodsWater Research, 2006
- MAGNETIC POLYSACCHARIDESInternational Journal of Polymeric Materials and Polymeric Biomaterials, 2002
- Pseudo-second order model for sorption processesProcess Biochemistry, 1999