Diesel Engine Cylinder Deactivation for Improved System Performance over Transient Real-World Drive Cycles
- 3 April 2018
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Effective control of exhaust emissions from modern diesel engines requires the use of aftertreatment systems. Elevated aftertreatment component temperatures are required for engine-out emissions reductions to acceptable tailpipe limits. Maintaining elevated aftertreatment components temperatures is particularly problematic during prolonged low speed, low load operation of the engine (i.e. idle, creep, stop and go traffic), on account of low engine-outlet temperatures during these operating conditions. Conventional techniques to achieve elevated aftertreatment component temperatures include delayed fuel injections and over-squeezing the turbocharger, both of which result in a significant fuel consumption penalty. Cylinder deactivation (CDA) has been studied as a candidate strategy to maintain favorable aftertreatment temperatures, in a fuel efficient manner, via reduced airflow through the engine. This work focuses on prediction and demonstration of fuel economy benefits of CDA when implemented at idle and low load portions of the emission certification cycles, such as the heavy duty federal test procedure (HD-FTP), and other real-world drive cycles, including the Orange County bus and port drayage creep cycles. A 3.4% benefit in fuel economy has been demonstrated over the HD-FTP, while maintaining tailpipe-out NOx emissions. Greater improvements in fuel economy have been predicted over the real world cycles, with a 5.6% reduction predicted over the Orange County bus cycle and 35% reduction predicted over the port drayage creep cycle.Keywords
This publication has 12 references indexed in Scilit:
- Utilizing low airflow strategies, including cylinder deactivation, to improve fuel efficiency and aftertreatment thermal managementInternational Journal of Engine Research, 2017
- Fuel efficient exhaust thermal management for compression ignition engines during idle via cylinder deactivation and flexible valve actuationInternational Journal of Engine Research, 2015
- Diesel Engine Technologies Enabling Powertrain Optimization to Meet U.S. Greenhouse Gas EmissionsSAE International Journal of Engines, 2013
- Experimental and Modeling Study of a Diesel Oxidation Catalyst (DOC) under Transient and CPF Active Regeneration ConditionsSAE International Journal of Advances and Current Practices in Mobility, 2013
- DOC Temperature Control for Low Temperature Operating Ranges with Post and Main Injection ActuationSAE International Journal of Advances and Current Practices in Mobility, 2013
- Meeting the US Heavy-Duty EPA 2010 Standards and Providing Increased Value for the CustomerSAE International Journal of Commercial Vehicles, 2010
- Technical Advantages of Urea SCR for Light-Duty and Heavy-Duty Diesel Vehicle ApplicationsSAE International Journal of Advances and Current Practices in Mobility, 2004
- A Comparison of Emissions and Fuel Economy from Hybrid-Electric and Conventional-Drive Transit BusesEnergy & Fuels, 2003
- Developments In Diesel Emission Aftertreatment TechnologySAE International Journal of Advances and Current Practices in Mobility, 2003
- Selective catalytic reduction of NOx using zeolitic catalysts for high temperature applicationsCatalysis Today, 1992