Microstructure, Crystallographic Texture, and Stretch‐Flangeability of Hot‐Rolled Multiphase Steel
- 25 February 2020
- journal article
- research article
- Published by Wiley in Steel Research International
- Vol. 91 (6)
Abstract
The microstructure, crystallographic texture, strain hardening in the hole edge‐punched and stretch‐flangeability of hot‐rolled multiphase sheet steel is investigated by scanning electron microscopy, electron backscatter diffraction, and microhardness measurements. The results show that the strain hardening in the hole edge‐punched is not the main factor that influences the hole expansion ratio. The bainite fraction, average grain area, and kernel average misorientation distribution mean are microstructure factors that improve the hole expandability and reduce the effect of strain hardening in the hole edge‐punched on the hole expansion ratio. The crystallographic texture affects the hole expandability. The high intensity of {332}α and {111}α components that have higher normal anisotropy () also reduces the effect of strain hardening at the hole edge‐punched. The cracks propagate through the interfaces following the banded microstructure direction at the hole edge‐punched during the punching process. The gamma distribution analysis of the kernel average misorientation distribution indicates that there are different energy transfer (β parameter) and dislocation densities due to different cooling rates.Keywords
This publication has 34 references indexed in Scilit:
- Prediction of hole expansion ratio for various steel sheets based on uniaxial tensile propertiesMetals and Materials International, 2018
- Factors governing hole expansion ratio of steel sheets with smooth sheared edgeMetals and Materials International, 2016
- Advanced High Strength Sheet Steels2015
- Influence of silicon on the microstructures, mechanical properties and stretch-flangeability of dual phase steelsInternational Journal of Minerals, Metallurgy and Materials, 2014
- Non-linear Correlation Between Uniaxial Tensile Properties and Shear-Edge Hole Expansion RatioJournal of Materials Engineering and Performance, 2014
- Hole Expansion Characteristics of Ultra High Strength SteelsProcedia Engineering, 2014
- Effect of micro-alloying elements on the stretch-flangeability of dual phase steelMaterials Science and Engineering: A, 2012
- Stretch-flangeability of strong multiphase steelsMaterials Science and Technology, 2007
- Hole Expansion in a Variety of Sheet SteelsJournal of Materials Engineering and Performance, 2006
- The relationships between tensile properties and hole expansion property of C-Mn steelsJournal of Materials Science, 2003