Geometric Parameter Calibration for a Cable-Driven Parallel Robot Based on a Single One-Dimensional Laser Distance Sensor Measurement and Experimental Modeling
Open Access
Abstract
A cable-driven parallel robot has benefits of wide workspace, high payload, and high dynamic response owing to its light cable actuator utilization. For wide workspace applications, in particular, the body frame becomes large to cover the wide workspace that causes robot kinematic errors resulting from geometric uncertainty. However, appropriate sensors as well as inexpensive and easy calibration methods to measure the actual robot kinematic parameters are not currently available. Hence, we present a calibration sensor device and an auto-calibration methodology for the over-constrained cable-driven parallel robots using one-dimension laser distance sensors attached to the robot end-effector, to overcome the robot geometric uncertainty and to implement precise robot control. A novel calibration workflow with five phases—preparation, modeling, measuring, identification, and adjustment—is proposed. The proposed calibration algorithms cover the cable-driven parallel robot kinematics, as well as uncertainty modeling such as cable elongation and pulley kinematics. We performed extensive simulations and experiments to verify the performance of the suggested method using the MINI cable robot. The experimental results show that the kinematic parameters can be identified correctly with 0.92 mm accuracy, and the robot position control accuracy is increased by 58%. Finally, we verified that the developed calibration sensor devices and the calibration methodology are applicable to the massive-size cable-driven parallel robot system.Keywords
Funding Information
- National Research Foundation of Korea (2012K1A4A3026740)
- Jeollanam-do of technology development project for Ppuri Industry (Leading Technology-011)
This publication has 19 references indexed in Scilit:
- Error Modeling and Experimental Study of a Flexible Joint 6-UPUR Parallel Six-Axis Force SensorSensors, 2017
- Design and Analysis of the Measurement Characteristics of a Bidirectional-Decoupling Over-Constrained Six-Dimensional Parallel-Mechanism Force SensorSensors, 2017
- Dynamics and Control of a 6-dof Cable-driven Parallel Robot with Visco-elastic Cables in Presence of Measurement NoiseJournal of Intelligent & Robotic Systems, 2017
- Designing Noncircular Pulleys to Realize Target Motion Between Two JointsIEEE/ASME Transactions on Mechatronics, 2016
- Mathematical Model and Calibration Experiment of a Large Measurement Range Flexible Joints 6-UPUR Six-Axis Force SensorSensors, 2016
- Calibration for a Planar Cable-Driven Parallel RobotJournal of Institute of Control, Robotics and Systems, 2015
- Design and Programming for Cable-Driven Parallel Robots in the German Pavilion at the EXPO 2015Machines, 2015
- Dynamic Modeling and Noncollocated Control of a Flexible Planar Cable-Driven ManipulatorIEEE Transactions on Robotics, 2014
- An Overview of Kinematic and Calibration Models Using Internal/External Sensors or Constraints to Improve the Behavior of Spatial Parallel MechanismsSensors, 2010
- Dynamic modeling and active control of a cable-suspended parallel robotMechatronics, 2008