Evaluating the Impact of 222 nm Far-UVC Radiation on the Aesthetic and Mechanical Properties of Materials Used in Public Bus Interiors
Authors:
- Darius DrungilasDDDarius Drungilas
- Mindaugas KurmisMKMindaugas Kurmis
- Arturas TadzijevasATArturas Tadzijevas
- Zydrunas LukosiusZLZydrunas Lukosius
- Arvydas MartinkenasAMArvydas Martinkenas
- Rimantas DidziokasRDRimantas Didziokas
- Jurate GruodeJGJurate Gruode
- Deivydas SapalasDSDeivydas Sapalas
- Valdas JankunasVJValdas Jankunas
Open Access
- 24 March 2023
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 13 (7) , 4141
Abstract
The use of 222 nm far-UVC radiation can be an effective means of disinfecting public buses against viruses, including SARS-CoV-2. However, it can cause degradation of the mechanical and visual properties of interior materials. The purpose of this study is to investigate the effects of 222 nm far-UVC radiation on the color and mechanical degradation of materials used to construct public bus interiors. This research work involves exposure of samples of materials commonly used in bus interiors to various levels of far-UVC radiation and measuring and evaluating changes in color and mechanical properties. The results of the study showed that far-UVC irradiation causes significant color degradation (∆E00 >5) in all the polymeric materials tested, after 290 J/cm2 radiant exposure. In addition, significant changes in mechanical properties were observed when evaluating elasticity modulus, elongation at ultimate strength, elongation at break, and tensile strength. A particularly large decrease in elongation at break (up to 26%) was observed in fiber-reinforced composite materials. The results of this study can be used as a guide for the development of protocols for the use of far-UVC disinfection in public transportation, which can help limit the transmission of infections while preserving the integrity and visual properties of bus interior materials.Keywords
Funding Information
- Lietuvos Mokslo Taryba (13.1.1-LMT-K-718-05-0002)
This publication has 36 references indexed in Scilit:
- A comparison study of the degradative effects and safety implications of UVC and 405 nm germicidal light sources for endoscope storagePolymer Degradation and Stability, 2016
- 207-nm UV Light - A Promising Tool for Safe Low-Cost Reduction of Surgical Site Infections. I: In Vitro StudiesPLOS ONE, 2013
- Photodegradation and photostabilization of polymers, especially polystyrene: reviewSpringerPlus, 2013
- Effects of UV irradiation on textured silicone rubber material2012
- Influence of Different Wave-Lengths Artificial Light on Surface Discoloration of Dyed VeneerAdvanced Materials Research, 2011
- The CIEDE2000 color-difference formula: Implementation notes, supplementary test data, and mathematical observationsColor Research & Application, 2004
- Photo-Corrosion of Different Metals during Long-Term Exposure to Ultraviolet LightCorrosion, 2003
- Discoloration and subsequent recovery of optical polymers exposed to ionizing radiationPolymer Degradation and Stability, 1995
- Radiometric CCD camera calibration and noise estimationIEEE Transactions on Pattern Analysis and Machine Intelligence, 1994
- Surface degradation of wood by ultraviolet lightJournal of Polymer Science: Polymer Chemistry Edition, 1984