Darius Drungilas
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Darius Drungilas has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Mindaugas Kurmis
Marine Research Institute, Klaipėda University, H. Manto Str. 84, LT-92294 Klaipėda, Lithuania
6 shared publications A. A. Bielskis
4 shared publications- Gediminas Gricius
Department of Informatics and Statistics, Klaipeda University, Bijunu Str. 17, 91225 Klaipeda, Lithuania
4 shared publications - Valdas Jankunas
Marine Research Institute, Klaipėda University, Universiteto Al. 17, 92295 Klaipėda, Lithuania
4 shared publications - Zydrunas Lukosius
Marine Research Institute, Klaipėda University, H. Manto Str. 84, LT-92294 Klaipėda, Lithuania
4 shared publications - Arturas Tadzijevas
Marine Research Institute, Klaipeda University, H. Manto 84, 92294 Klaipeda, Lithuania
3 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- p. 1
A Multi-Level Deep Reinforcement Learning Approach for Dynamic Assortment Control in Large-Scale Retail Networks
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- p. 1
Open AccessA Multi-Level Deep Reinforcement Learning Approach for Dynamic Assortment Control in Large-Scale Retail Networks
- Open Access
Validity and Reliability of the Turkish Version of the Celiac Dietary Adherence Test
Background and Objectives: In clinical practice and research, it is necessary to use a standardized measurement tool to accurately determine dietary adherence in adults with celiac disease. The aim of this study is to validate the Celiac Dietary Adherence Test (CDAT) in the Turkish patients with celiac disease. Methods: The CDAT was translated using forward-backward translation method, reviewed by experts, and tested for comprehensibility. The final revised version of the CDAT was completed by 97 adults diagnosed with celiac disease and following a gluten-free diet. Construct validity was assessed using exploratory factor analysis (EFA) and confirmatory factor analysis (CFA). Reliability was evaluated via internal consistency (Cronbach’s alpha) and test–retest reliability (Pearson correlation) after re-administration within 2 weeks. Results: Exploratory factor analysis yielded a Kaiser-Meyer-Olkin (KMO) value of 0.69, with Bartlett’s test of sphericity being significant (p < 0.001). EFA indicated a single-factor structure, explaining 55% of the total variance. CFA showed acceptable fit indices for the model (χ2/df = 1.45, CFI = 0.93, TLI = 0.90, RMSEA = 0.07, GFI = 0.94, AGFI = 0.88). Reliability analyses indicated Cronbach’s alpha of 0.70, and a test–retest correlation of 0.92. Items 5 and 6 were removed from the Turkish version of the CDAT because their factor loadings were below 0.40. Conclusions: The Turkish CDAT is valid and reliable for rapid, standardized assessment of adherence to a gluten-free diet in adults with celiac disease.
Open AccessValidity and Reliability of the Turkish Version of the Celiac Dietary Adherence Test
Background and Objectives: In clinical practice and research, it is necessary to use a standardized measurement tool to accurately determine dietary adherence in adults with celiac disease. The aim of this study is to validate the Celiac Dietary Adherence Test (CDAT) in the Turkish patients with celiac disease. Methods: The CDAT was translated using forward-backward translation method, reviewed by experts, and tested for comprehensibility. The final revised version of the CDAT was completed by 97 adults diagnosed with celiac disease and following a gluten-free diet. Construct validity was assessed using exploratory factor analysis (EFA) and confirmatory factor analysis (CFA). Reliability was evaluated via internal consistency (Cronbach’s alpha) and test–retest reliability (Pearson correlation) after re-administration within 2 weeks. Results: Exploratory factor analysis yielded a Kaiser-Meyer-Olkin (KMO) value of 0.69, with Bartlett’s test of sphericity being significant (p < 0.001). EFA indicated a single-factor structure, explaining 55% of the total variance. CFA showed acceptable fit indices for the model (χ2/df = 1.45, CFI = 0.93, TLI = 0.90, RMSEA = 0.07, GFI = 0.94, AGFI = 0.88). Reliability analyses indicated Cronbach’s alpha of 0.70, and a test–retest correlation of 0.92. Items 5 and 6 were removed from the Turkish version of the CDAT because their factor loadings were below 0.40. Conclusions: The Turkish CDAT is valid and reliable for rapid, standardized assessment of adherence to a gluten-free diet in adults with celiac disease.
- Open Access
- 31 May 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (11) , 4773
Emotion Recognition in Usability Testing: A Framework for Improving Web Application UI Design
Traditional usability testing methods often lack the ability to fully capture different aspects of the user experience (UX). The focus of this research work is to propose a framework and develop its comprehensive prototype to improve usability testing and UX analysis by integrating session recording, interaction logging, and emotion recognition methods. A trained emotion recognition model based on MobileNetV2 architecture in conjunction with Hotjar and Google Analytics is proposed to add more context to the user experience during usability testing. The results obtained during the testing of a developed framework prototype showed that UI testing based on UX principles and integration of emotion recognition can be a powerful tool for improving the UI of web applications. It is recommended to improve UI testing processes by incorporating these aspects and data analysis methods. This would provide a more complete and more objective picture of the usability of the interface.
- 31 May 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (11) , 4773
Open AccessEmotion Recognition in Usability Testing: A Framework for Improving Web Application UI Design
Traditional usability testing methods often lack the ability to fully capture different aspects of the user experience (UX). The focus of this research work is to propose a framework and develop its comprehensive prototype to improve usability testing and UX analysis by integrating session recording, interaction logging, and emotion recognition methods. A trained emotion recognition model based on MobileNetV2 architecture in conjunction with Hotjar and Google Analytics is proposed to add more context to the user experience during usability testing. The results obtained during the testing of a developed framework prototype showed that UI testing based on UX principles and integration of emotion recognition can be a powerful tool for improving the UI of web applications. It is recommended to improve UI testing processes by incorporating these aspects and data analysis methods. This would provide a more complete and more objective picture of the usability of the interface.
- Open Access
- 23 July 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (14) , 8501
Development of Far-UVC-Based Surface Disinfection Prototype for Public Buses
This paper presents a prototype of a disinfection system for public transport specifically aiming to disinfect surfaces contaminated with the SARS-CoV-2 virus on buses using 222 nm wavelength far-ultraviolet light (far-UVC). Our study involved testing the developed technical system installed in a 12 m long M3 category urban bus, an investigation of optimal far-UVC light angles, and the determination of disinfection parameters for bus seat disinfection. The study identified the ideal positioning of a light source for effective disinfection and analyzed three disinfection scenarios, considering zone coverage, disinfection time, and energy demand. A subsystem employing real-time occupancy monitoring enhances the disinfection process in crowded areas of buses. An energy efficiency assessment model is proposed for optimizing energy consumption. Furthermore, the energy consumption analyses in different disinfection scenarios provide valuable insights for optimizing energy usage in public transport disinfection.
- 23 July 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (14) , 8501
Open AccessDevelopment of Far-UVC-Based Surface Disinfection Prototype for Public Buses
This paper presents a prototype of a disinfection system for public transport specifically aiming to disinfect surfaces contaminated with the SARS-CoV-2 virus on buses using 222 nm wavelength far-ultraviolet light (far-UVC). Our study involved testing the developed technical system installed in a 12 m long M3 category urban bus, an investigation of optimal far-UVC light angles, and the determination of disinfection parameters for bus seat disinfection. The study identified the ideal positioning of a light source for effective disinfection and analyzed three disinfection scenarios, considering zone coverage, disinfection time, and energy demand. A subsystem employing real-time occupancy monitoring enhances the disinfection process in crowded areas of buses. An energy efficiency assessment model is proposed for optimizing energy consumption. Furthermore, the energy consumption analyses in different disinfection scenarios provide valuable insights for optimizing energy usage in public transport disinfection.
- Open Access
RT-qPCR-Based Assessment of the Efficacy of 222 nm UVC Irradiation in Reducing SARS-CoV-2 Surface Contamination
Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), which causes coronavirus disease 2019 (COVID-19), has emerged as a serious threat to human health worldwide. The effective disinfection of surfaces contaminated with SARS-CoV-2 may help prevent its spread. The aim of this study is to determine the duration required for viral RNA elimination by 222 nm far ultraviolet light using RT-qPCR as a tool. This study investigated the effect of 222 nm UVC irradiation on SARS-CoV-2 RNA in an in vitro experiment. The results showed that the copy number of SARS-CoV-2 RNA did not change even after 300 s of 222 nm UVC irradiation at 0.1 mW/cm2, but extending the exposure to more than 600 s reduced the number of copies of SARS-CoV-2 virus significantly. However, to fully validate the results and enhance the robustness of the findings, it is crucial to increase the number of samples analyzed in future experiments.
Open AccessRT-qPCR-Based Assessment of the Efficacy of 222 nm UVC Irradiation in Reducing SARS-CoV-2 Surface Contamination
Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), which causes coronavirus disease 2019 (COVID-19), has emerged as a serious threat to human health worldwide. The effective disinfection of surfaces contaminated with SARS-CoV-2 may help prevent its spread. The aim of this study is to determine the duration required for viral RNA elimination by 222 nm far ultraviolet light using RT-qPCR as a tool. This study investigated the effect of 222 nm UVC irradiation on SARS-CoV-2 RNA in an in vitro experiment. The results showed that the copy number of SARS-CoV-2 RNA did not change even after 300 s of 222 nm UVC irradiation at 0.1 mW/cm2, but extending the exposure to more than 600 s reduced the number of copies of SARS-CoV-2 virus significantly. However, to fully validate the results and enhance the robustness of the findings, it is crucial to increase the number of samples analyzed in future experiments.
- Open Access
- 24 March 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (7) , 4141
Evaluating the Impact of 222 nm Far-UVC Radiation on the Aesthetic and Mechanical Properties of Materials Used in Public Bus Interiors
The use of 222 nm far-UVC radiation can be an effective means of disinfecting public buses against viruses, including SARS-CoV-2. However, it can cause degradation of the mechanical and visual properties of interior materials. The purpose of this study is to investigate the effects of 222 nm far-UVC radiation on the color and mechanical degradation of materials used to construct public bus interiors. This research work involves exposure of samples of materials commonly used in bus interiors to various levels of far-UVC radiation and measuring and evaluating changes in color and mechanical properties. The results of the study showed that far-UVC irradiation causes significant color degradation (∆E00 >5) in all the polymeric materials tested, after 290 J/cm2 radiant exposure. In addition, significant changes in mechanical properties were observed when evaluating elasticity modulus, elongation at ultimate strength, elongation at break, and tensile strength. A particularly large decrease in elongation at break (up to 26%) was observed in fiber-reinforced composite materials. The results of this study can be used as a guide for the development of protocols for the use of far-UVC disinfection in public transportation, which can help limit the transmission of infections while preserving the integrity and visual properties of bus interior materials.
- 24 March 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (7) , 4141
Open AccessEvaluating the Impact of 222 nm Far-UVC Radiation on the Aesthetic and Mechanical Properties of Materials Used in Public Bus Interiors
The use of 222 nm far-UVC radiation can be an effective means of disinfecting public buses against viruses, including SARS-CoV-2. However, it can cause degradation of the mechanical and visual properties of interior materials. The purpose of this study is to investigate the effects of 222 nm far-UVC radiation on the color and mechanical degradation of materials used to construct public bus interiors. This research work involves exposure of samples of materials commonly used in bus interiors to various levels of far-UVC radiation and measuring and evaluating changes in color and mechanical properties. The results of the study showed that far-UVC irradiation causes significant color degradation (∆E00 >5) in all the polymeric materials tested, after 290 J/cm2 radiant exposure. In addition, significant changes in mechanical properties were observed when evaluating elasticity modulus, elongation at ultimate strength, elongation at break, and tensile strength. A particularly large decrease in elongation at break (up to 26%) was observed in fiber-reinforced composite materials. The results of this study can be used as a guide for the development of protocols for the use of far-UVC disinfection in public transportation, which can help limit the transmission of infections while preserving the integrity and visual properties of bus interior materials.
- 31 March 2022
- Published by Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne in Eksploatacja i Niezawodność – Maintenance and Reliability
- Vol. 24 (1) , 89-99
Investigation of dynamics and power needs for container unloading from ship process
- 31 March 2022
- Published by Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne in Eksploatacja i Niezawodność – Maintenance and Reliability
- Vol. 24 (1) , 89-99
Investigation of dynamics and power needs for container unloading from ship process
- Open Access
- 24 November 2017
- Published by VSB - Technical University of Ostrava in Advances in Electrical and Electronic Engineering
- Vol. 15 (4) , 598 - 605
Development of Method for Service Support Management in Vehicular Communication Networks
In this work, the method and prototype for managing the quality of wireless communication channel is presented. The proposed methodology, based on multi-criteria information utility assessment process, is designed. The heterogeneous context awareness data collection subsystems integration is enabled by transforming the acquired data to the highly dynamic intelligent transport systems. Each element of this intellectual transport system runs as a separate component having a specific environmental monitoring and control elements. Evaluation of context information utility allowed realizing the methods and algorithms that adaptively reduce the load on the wireless channel, and the transmitted and stored data volume without losing the enriched contextual information quality, which allows developing more complex heterogeneous services. It is believed that the obtained scientific results will have positive effect for the future research and development of context awareness and service adaptation systems.
- 24 November 2017
- Published by VSB - Technical University of Ostrava in Advances in Electrical and Electronic Engineering
- Vol. 15 (4) , 598 - 605
Open AccessDevelopment of Method for Service Support Management in Vehicular Communication Networks
In this work, the method and prototype for managing the quality of wireless communication channel is presented. The proposed methodology, based on multi-criteria information utility assessment process, is designed. The heterogeneous context awareness data collection subsystems integration is enabled by transforming the acquired data to the highly dynamic intelligent transport systems. Each element of this intellectual transport system runs as a separate component having a specific environmental monitoring and control elements. Evaluation of context information utility allowed realizing the methods and algorithms that adaptively reduce the load on the wireless channel, and the transmitted and stored data volume without losing the enriched contextual information quality, which allows developing more complex heterogeneous services. It is believed that the obtained scientific results will have positive effect for the future research and development of context awareness and service adaptation systems.
- Open Access
- 19 November 2013
- Published by VSB - Technical University of Ostrava in Advances in Electrical and Electronic Engineering
- Vol. 11 (5) , 342 - 348
Development of the Real Time Situation Identification Model for Adaptive Service Support in Vehicular Communication Networks Domain
Development of the Real Time Situation Identification Model for Adaptive Service Support in Vehicular Communication Networks Domain
- 19 November 2013
- Published by VSB - Technical University of Ostrava in Advances in Electrical and Electronic Engineering
- Vol. 11 (5) , 342 - 348
Open AccessDevelopment of the Real Time Situation Identification Model for Adaptive Service Support in Vehicular Communication Networks Domain
Development of the Real Time Situation Identification Model for Adaptive Service Support in Vehicular Communication Networks Domain
- Open Access
- 10 October 2013
- Published by Kaunas University of Technology (KTU) in Elektronika ir Elektrotechnika
- Vol. 19 (8) , 79-82-82
Modelling of Ambient Comfort Affect Reward Based Adaptive Laboratory Climate Controller
Modelling of Ambient Comfort Affect Reward Based Adaptive Laboratory Climate Controller
- 10 October 2013
- Published by Kaunas University of Technology (KTU) in Elektronika ir Elektrotechnika
- Vol. 19 (8) , 79-82-82
Open AccessModelling of Ambient Comfort Affect Reward Based Adaptive Laboratory Climate Controller
Modelling of Ambient Comfort Affect Reward Based Adaptive Laboratory Climate Controller