Stretchable h‐BN/TPU Fibers for Passive‐Active Dual‐Mode Thermal Management and Wearable Haptic Interfaces
Open Access
- 15 October 2026
- journal article
- research article
- Published by Wiley in Advanced Science
- p. e78162
Abstract
Wearable thermal interfaces require rapid, spatially confined thermal feedback together with mechanical compliance, yet existing passive thermal‐management textiles and active thermal‐haptic devices remain largely separate. Here, a stretchable h ‐BN/TPU composite fiber is developed by coupling microfluidic spinning with non‐solvent‐induced phase separation. Rectangular‐channel confinement aligns hexagonal boron nitride plates within a microporous thermoplastic polyurethane matrix, constructing directional heat‐conduction pathways while preserving large deformation. The optimized 30 wt.% h ‐BN/TPU fiber achieves a dry‐state thermal conductivity of 2.08 and 4.14 W·m −1 ·K −1 under humid conditions, together with 9.67 MPa tensile strength and 422% elongation at break. Pareto‐front analysis identifies the 30 wt.% composition as the thermal‐mechanical knee, arising from the coupled effects of filler orientation, low void fraction, and deformable TPU domains. Woven h ‐BN/TPU fabrics provide passive thermal management, reducing surface temperature by 5.7°C under simulated solar irradiation and maintaining performance after 2000 bending cycles. When integrated into a thermal feedback glove, the fabric enables localized fingertip actuation with a heating rate of +29.55°C·s −1 and a thermal relaxation time of ∼20 s (returning below the warm perception threshold of 35°C). This fiber platform bridges passive heat regulation and active thermal haptics for next‐generation thermally interactive wearables.Keywords
Funding Information
- National Natural Science Foundation of China (52403122)
- National Natural Science Foundation of China (52403121)
- Natural Science Foundation of Ningbo Municipality (2024J112)
This publication has 60 references indexed in Scilit:
- Bi‐Directional Assembly of Boron Nitride µ‐Platelets by Micro‐Molding for Advanced Thermal Interface MaterialsAdvanced Functional Materials, 2025
- Wearable Haptic Feedback Interfaces for Augmenting Human TouchAdvanced Functional Materials, 2025
- Thermally Conductive Hexagonal Boron Nitride/Polymer Composites for Efficient Heat TransportAdvanced Functional Materials, 2024
- A Roadmap Review of Thermally Conductive Polymer Composites: Critical Factors, Progress, and ProspectsAdvanced Functional Materials, 2023
- Vertical Array of Graphite Oxide Liquid Crystal by Microwire Shearing for Highly Thermally Conductive CompositesAdvanced Materials, 2023
- Scalable, Robust, Low‐Cost, and Highly Thermally Conductive Anisotropic Nanocomposite Films for Safe and Efficient Thermal ManagementAdvanced Functional Materials, 2021
- A Biomimetic Transpiration Textile for Highly Efficient Personal Drying and CoolingAdvanced Functional Materials, 2021
- Thermo‐Haptic Materials and Devices for Wearable Virtual and Augmented RealityAdvanced Functional Materials, 2020
- Emerging Materials and Strategies for Personal Thermal ManagementAdvanced Energy Materials, 2020
- Anisotropic Thermal Conductive Composite by the Guided Assembly of Boron Nitride Nanosheets for Flexible and Stretchable ElectronicsAdvanced Functional Materials, 2019